Manual Makita UN001G Corta-sebes

Manual

14 ENGLISH

5. Check damaged parts. Before further use of

the tool, any part which is damaged should be

carefully checked to determine that it will oper-

ate properly and perform its intended function.

Check for alignment of moving parts, binding

of moving parts, breakage of parts, mounting

󰀨

operation. A guard or other part that is damaged



authorized service center.

6. Use genuine spare parts only.

7. When moving the tool to another location,

including during work, always remove the

battery cartridge and put the blade cover on

the shear blades. Never carry or transport the

tool with the blades running. Never grasp the

blades with your hands.

8. Clean the tool and especially the shear blades

after use, and before putting the tool into stor-

age for extended periods. Lightly oil the shear

blades and put on the blade cover.

9. Do not wash the tool with high pressure water.

10. When washing the tool, do not let water enter

the electrical mechanism such as battery,

motor, and terminals.

11. Perform inspection or maintenance in a place

where rain can be avoided.

12. After using the tool, remove the adhered dirt

and dry the tool completely before storing.

Depending on the season or the area, there is a

risk of malfunction due to freezing.

13. When storing the tool, avoid direct sunlight

and rain, and store it in a place where it does

not get hot or humid.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product. MISUSE or failure to follow the safety

rules stated in this instruction manual may cause

serious personal injury.

Important safety instructions for

battery cartridge

1. Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using

battery.

2. Do not disassemble or tamper with the battery

cartridge.

or explosion.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them

out with clear water and seek medical atten-

tion right away. It may result in loss of your

eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any con-

ductive material.

(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water

or rain.

A battery short can cause a large current



breakdown.

6. Do not store and use the tool and battery car-

tridge in locations where the temperature may

reach or exceed 50 °C (122 °F).

7. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn



8. Do not nail, cut, crush, throw, drop the battery

cartridge, or hit against a hard object to the

battery cartridge.



9. Do not use a damaged battery.

10. The contained lithium-ion batteries are subject

to the Dangerous Goods Legislation require-

ments.



forwarding agents, special requirement on pack-

aging and labeling must be observed.

For preparation of the item being shipped, consult-

ing an expert for hazardous material is required.



national regulations.

󰀨



around in the packaging.

11. When disposing the battery cartridge, remove

it from the tool and dispose of it in a safe

place. Follow your local regulations relating to

disposal of battery.

12. Use the batteries only with the products

 Installing the batteries to

-



13. If the tool is not used for a long period of time,

the battery must be removed from the tool.

14. During and after use, the battery cartridge may

take on heat which can cause burns or low

temperature burns. Pay attention to the han-

dling of hot battery cartridges.

15. Do not touch the terminal of the tool imme-

diately after use as it may get hot enough to

cause burns.

16. Do not allow chips, dust, or soil stuck into the

terminals, holes, and grooves of the battery

cartridge.

-



17. Unless the tool supports the use near

high-voltage electrical power lines, do not use

the battery cartridge near high-voltage electri-

cal power lines.



18. Keep the battery away from children.

SAVE THESE INSTRUCTIONS.

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Makita UN001G Corta-sebes. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Makita. Eles podem fornecer um manual original. Você está procurando o manual do seu Makita UN001G Corta-sebes em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Makita Corta-sebes
Mais manuais de Corta-sebes

Perguntas frequentes sobre Makita UN001G Corta-sebes

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.

Produtos relacionados

Manual

Makita DUN461WZ Corta-sebes

Manual

Makita DUH507 Corta-sebes

Manual

Makita UH650D Corta-sebes

Manual

Makita UH4860 Corta-sebes

Manual

Makita UH009GM201 Corta-sebes

Manual

Makita UH004GD201 Corta-sebes

Manual

Makita UH008GZ Corta-sebes

Manual

Makita UH5570 Corta-sebes

Categorias relacionadas