Manual Makita UN001G Corta-sebes

Manual

13 ENGLISH

6. Only use the tool for its intended purpose. Do

not use the tool for any other purpose.

7. 󰀨

cartridge before:

• cleaning or when clearing a blockage,

• checking, carrying out maintenance or

working on the tool,

• adjusting the working position of the

shear blades,

• leaving the tool unattended.

8. Ensure that the tool is correctly located in a

designated working position before starting

the tool.

9. Do not operate the tool with a damaged or

excessively worn shear blades.

10. Always ensure that all handles and guards







11. Always be aware of your surroundings and

stay alert for possible hazards of which you

may not be aware due to the noise of the tool.

12. Be careful not to accidentally contact a metal

fence or other hard objects during operation.



13. Avoid unintentional starting. Do not carry the

tool when the battery cartridge is installed



󰀨

cartridge.

14. Do not grasp the exposed cutting blades or

cutting edges when picking up or holding the

tool.

15. Do not force the tool.



which it was designed.

16. Do not use the tool in the rain or in wet or

very damp conditions. The electric motor is not

waterproof.

17. 

18. Do not operate the tool at no-load

unnecessarily.

19. Before checking the shear blades, taking care

of faults, or removing foreign objects caught

󰀨

and remove the battery cartridge.

20. Never point the shear blades to yourself or

others.

21. If the blades stop moving due to the stuck of

foreign objects between the blades during

󰀨

battery cartridge, and then remove the foreign

objects using tools such as pliers. Removing



-



22. Make sure there are no electrical cables, water

pipes, gas pipes etc. that could cause a hazard

if damaged by use of the tool.

23. Do not touch the metal parts or hot surfaces of

the tool during use or immediately after oper-

ation; they may be extremely hot and could

burn your skin. Let the tool cool down before



24. Do not use the tool on soft/unstable/slippery

ground or steep inclines. Avoid working on

ladders or at heights.



25. Do not use the tool in bad weather or at night

where visibility is limited. Failure to do so





26. Avoid working in poor environment where

increased user fatigue is expected.

27. Do not submerge the tool into a puddle.

28. Do not leave the tool unattended outdoors in

the rain.

29. When wet leaves or dirt adhere to the suc-

tion mouth (ventilation window) due to rain,

remove them.

30. Do not use the tool in the snow.

Electrical and battery safety

1. 

cell may explode. Check with local codes for

possible special disposal instructions.

2. Do not open or mutilate the battery(ies).

Released electrolyte is corrosive and may

cause damage to the eyes or skin. It may be

toxic if swallowed.

3.

Do not charge battery in rain, or in wet locations.

4. Do not charge the battery outdoors.

5. Do not handle charger, including charger plug,

and charger terminals with wet hands.

6. Do not replace the battery with wet hands.

7. Do not replace the battery in the rain.

8. Do not wet the terminal of battery with liquid

such as water, or submerge the battery. Do not

leave the battery in the rain, nor charge, use,

or store the battery in a damp or wet place. If

the terminal gets wet or liquid enters inside of bat-





9. After removing the battery from the tool or

charger, be sure to attach the battery cover to

the battery and store it in a dry place.

10. If the battery cartridge gets wet, drain the

water inside and then wipe it with a dry cloth.

Dry the battery cartridge completely in a dry

place before use.

Maintenance and storage

1. When the tool is stopped for servicing, inspec-

󰀨

the battery cartridge, and make sure all mov-

ing parts have come to a stop. Allow the tool

to cool before making any inspections, adjust-

ment, etc.

2. Always allow the tool to cool down before

storing.

3. When not in use, attach the blade cover to the

tool and store the tool indoors in dry, and high

locked-up place, out of reach of children.

4. Maintain the tool with care. Keep cutting edge

sharp and clean for best performance and to

reduce the risk of injury. Follow instructions

for lubricating and changing accessories.

Keep handles dry, clean, and free from oil and

grease.

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Makita UN001G Corta-sebes. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Makita. Eles podem fornecer um manual original. Você está procurando o manual do seu Makita UN001G Corta-sebes em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Makita Corta-sebes
Mais manuais de Corta-sebes

Perguntas frequentes sobre Makita UN001G Corta-sebes

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.

Produtos relacionados

Manual

Makita DUN461WZ Corta-sebes

Manual

Makita DUH507 Corta-sebes

Manual

Makita UH650D Corta-sebes

Manual

Makita UH4860 Corta-sebes

Manual

Makita UH009GM201 Corta-sebes

Manual

Makita UH004GD201 Corta-sebes

Manual

Makita UH008GZ Corta-sebes

Manual

Makita UH5570 Corta-sebes

Categorias relacionadas