13 ENGLISH
PARTS DESCRIPTION
Parts description
Fig.4
1 Switch trigger 2
3 Indication lamp 4 Loop handle
5 Wire guard 6 Nylon cutting head
7 Nylon cord 8 Protector
9
button
10 Lock lever
11 Thumb nut 12 Hanger for shoulder
harness
13 Battery cartridge - -
ASSEMBLY
CAUTION: Always be sure that the tool is
before carrying out any work on the tool.
CAUTION: Never start the tool unless it is
completely assembled. Operation of the tool in a
partially assembled state may result in serious per-
Installing the loop handle
Attach the loop handle to the tool by securing it with a
Fig.5: 1. Loop handle 2. Thumb nut 3. Hex bolt
angle of loop handle, loosen the thumb nut, then set the
loop handle at a proper angle according to your work,
Installing the protector
CAUTION: While installing the protector, be
careful not to contact the nylon cord cutter on
the protector. Contact with the cutter could result in
Fig.6: 1. Protector 2. Nylon cord cutter 3. Screw
and then secure it with the screw.
Installing the wire guard
NOTICE: Do not expand the wire guard outward
too much. Otherwise it may break.
Fig.7
cutting head, attach the wire guard to the motor housing
so that it controls the cutting range.
Slightly expand the wire guard outward and then insert
it into the holes of the motor housing.
Fig.8: 1. Wire guard 2. Hole
When wire guard is not in use, lift it for the idle position.
Fig.9: 1. Wire guard
Attaching the shoulder harness
CAUTION: Be sure to attach the hook of
shoulder harness to the tool securely. If the hook
cause an injury.
CAUTION: When you use the tool in combi-
nation of the backpack-type power supply such
as portable power pack, do not use the shoulder
harness included in the tool package, but use the
hanging band recommended by Makita.
If you put on the shoulder harness included in the
tool package and the shoulder harness of the back-
pack-type power supply at the same time, removing
case of an emergency, and it may cause an accident
Makita Authorized Service Centers.
NOTICE: Before operation, adjust the shoulder
harness to the proper length to prevent fatigue.
Fig.10: 1. Hook 2. Hanger
Attach the hook of shoulder harness to the tool as
FUNCTIONAL
DESCRIPTION
WARNING: Always be sure that the tool is
before adjusting or checking function on the tool.
start-up.
Installing or removing battery
cartridge
CAUTION:
installing or removing of the battery cartridge.
CAUTION: Hold the tool and the battery car-
cartridge. Failure to hold the tool and the battery
and result in damage to the tool and battery cartridge
CAUTION: Always install the battery cartridge
fully until the red indicator cannot be seen. If not,
you or someone around you.
CAUTION: Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
Participe da conversa sobre este produto
Aqui você pode compartilhar o que pensa sobre Makita DUR193 Aparador de relva. Se você tiver alguma dúvida, primeiro leia atentamente o manual. A solicitação de manual pode ser feita através do nosso formulário de contato.