Manual Makita DUR141 Aparador de relva

Manual

9

4. Keep hands and feet away from the cutting means

at all times and especially when switching on the

motor.

5. Never cut above waist height.

6. Never stand on a ladder and run the tool.

7. Never work on unstable surfaces.

8. Don’t overreach. Keep proper footing and balance

at all times.

9. Always be sure of your footing on slopes.

10. Walk, never run.

11. Remove sand, stones, nails etc. found within the

working range. Foreign particles may damage the

cutting tool and can cause to be thrown away,

resulting in a serious injury.

12. Never touch moving hazardous parts before the

machine is disconnected from the mains and the

moving hazardous parts have come to a complete

stop.

13. Should the cutting tool hit stones or other hard

objects, immediately switch off the motor and

inspect the cutting tool.

14. Before commencing cutting, the cutting tool must

have reached full working speed.

15. During operation always hold the tool with both

hands. Never hold the tool with one hand during

use. Always ensure a safe footing.

16. All protective equipment such as guards supplied

with the tool must be used during operation.

17. Except in case of emergency, never drop or cast

the tool to the ground or this may severely

damage the tool.

18. Never drag the tool on the ground when moving

from place to place, the tool may become

damaged if moved in this manner.

19. Always remove the battery cartridge from the tool:

– whenever leaving the tool unattended;

– before clearing a blockage;

– before checking, cleaning or working on the

tool;

– before making any adjustments, changing

accessories or storing;

– whenever the tool starts vibrating unusually;

– whenever transporting the tool.

20. Don’t force the tool. It will do the job better and

with less likelihood of a risk of injury at the rate for

which it was designed.

Maintenance instructions

1. The condition of the cutting tool, protective

devices must be checked before commencing

work.

2. Turn off the motor and remove the battery

cartridge before carrying out maintenance,

replacing the cutting tool and cleaning the tool.

3. After use, disconnect the battery cartridge from

the tool and check for damage.

4. Check for loose fasteners and damaged parts

such as nearly halfway cut-off state in the cutting

tool.

5. When not in use store the equipment in a dry

location that is locked up or out of children’s

reach.

6. Use only the manufacturer’s recommended

replacement parts and accessories.

7. Always ensure that ventilation openings are kept

clear of debris.

8. Inspect and maintain the tool regularly, especially

before/after use. Have the tool repaired only by

our authorized service center.

9. Keep handles dry, clean and free from oil and

grease.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product (gained

from repeated use) replace strict adherence to safety

rules for the subject product. MISUSE or failure to

follow the safety rules stated in this instruction

manual may cause serious personal injury.

IMPORTANT SAFETY

INSTRUCTIONS

ENC007-11

FOR BATTERY CARTRIDGE

1. Before using battery cartridge, read all

instructions and cautionary markings on (1)

battery charger, (2) battery, and (3) product using

battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively shorter,

stop operating immediately. It may result in a risk

of overheating, possible burns and even an

explosion.

4. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any

conductive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a

breakdown.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

7. Do not incinerate the battery cartridge even if it is

severely damaged or is completely worn out. The

battery cartridge can explode in a fire.

8. Be careful not to drop or strike battery.

9. Do not use a damaged battery.

10. The contained lithium-ion batteries are subject to

the Dangerous Goods Legislation requirements.

For commercial transports e.g. by third parties,

forwarding agents, special requirement on packaging

and labeling must be observed.

For preparation of the item being shipped, consulting

an expert for hazardous material is required. Please

also observe possibly more detailed national

regulations.

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Makita DUR141 Aparador de relva. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Makita. Eles podem fornecer um manual original. Você está procurando o manual do seu Makita DUR141 Aparador de relva em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Makita Aparadores de relva
Mais manuais de Aparadores de relva

Produtos relacionados

Manual

Makita DUR193 Aparador de relva

Manual

Makita DUR189 Aparador de relva

Manual

Makita DBC260L Aparador de relva

Manual

Makita DUR369LPT2 Aparador de relva

Manual

Makita DUR369AZ Aparador de relva

Manual

Makita DUR369A Aparador de relva

Manual

Makita BUR181 Aparador de relva

Manual

Makita DUR368AZ Aparador de relva

Categorias relacionadas