Manual Makita DUR141 Aparador de relva

Manual

8

environmentally compatible recycling

facility.

IMPORTANT SAFETY

INSTRUCTIONS

GEB092-5

WARNING! Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for

future reference.

1. Be familiar with the controls and proper use of the

equipment.

2. Cutting elements continue to rotate after the motor

is switched off.

3. Never allow children or people unfamiliar with the

instructions to use the machine.

4. Stop using the machine while people, especially

children, or pets are nearby.

5. Only use the machine in daylight or good artificial

light.

6. Before using the machine and after any impact,

check for signs of wear or damage and repair as

necessary.

7. Take care against injury from any device fitted for

trimming the filament line length. After extending

new cutter line always return the machine to its

normal operating position before switching on.

8. Never fit metal cutting elements.

9. This appliance is not intended for use by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of

experience and knowledge, unless they have been

given supervision or instruction concerning use

of the appliance by a person responsible for their

safety. Children should be supervised to ensure

that they do not play with the appliance.

10. Use the tool with the utmost care and attention.

11. Operate the tool only if you are in good physical

condition. Perform all work calmly and carefully.

Use common sense and keep in mind that the

operator or user is responsible for accidents or

hazards occurring to other people or their

property.

12. Never operate the tool when tired, feeling ill or

under the influence of alcohol or drugs.

13. The tool should be switched off immediately if it

shows any signs of unusual operation.

Intended use of the tool

1. Use right tool. The cordless string trimmer is only

intended for cutting grass, light weeds. It should

not be used for any other purpose such as hedge

cutting as this may cause injury.

Personal protective equipment (Fig. 1 & 2)

1. Dress Properly. The clothing worn should be

functional and appropriate, i.e. it should be tight-

fitting but not cause hindrance. Do not wear either

jewelry or clothing which could become entangled

with high grass. Wear protective hair covering to

contain long hair.

2. When using the tool, always wear sturdy shoes

with a non-slip sole. This protects against injuries

and ensures a good footing.

3. Wear protective glasses or goggles.

Electrical and battery safety

1. Avoid dangerous environment. Don’t use the tool

in damp or wet locations or expose it to rain.

Water entering the tool will increase the risk of

electric shock.

2. Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one

type of battery pack may create a risk of fire when

used with another battery pack.

3. Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

4. Do not dispose of the battery(ies) in a fire. The cell

may explode. Check with local codes for possible

special disposal instructions.

5. Do not open or mutilate the battery(ies). Released

electrolyte is corrosive and may cause damage to

the eyes or skin. It may be toxic if swallowed.

Starting up the tool (Fig. 3)

1. Make sure that there are no children or other

people within a working range of 15 meters (50 ft),

also pay attention to any animals in the working

vicinity. Otherwise stop using the tool.

2. Before use always check that the tool is safe for

operation. Check the security of the cutting tool

and the guard and the switch trigger/lever for easy

and proper action. Check for clean and dry

handles and test the on/off function of the switch.

3. Check damaged parts before further use of the

tool. A guard or other part that is damaged should

be carefully checked to determine that it will

operate properly and perform its intended

function. Check for alignment of moving parts,

binding of moving parts, breakage of parts,

mounting, and any other condition that may affect

its operation. A guard or other part that is

damaged should be properly repaired or replaced

by our authorized service center unless indicated

elsewhere in this manual.

4. Switch on the motor only when hands and feet are

away from the cutting tool.

5. Before starting make sure that the cutting tool has

no contact with hard objects such as branches,

stones etc. as the cutting tool will revolve when

starting.

Method of operation

1. Never operate the machine with damaged guards

or without the guards in place.

2. Only use the tool in good light and visibility.

During the winter season beware of slippery or

wet areas, ice and snow (risk of slipping). Always

ensure a safe footing.

3. Take care against injury to feet and hands from the

cutting tool.

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Makita DUR141 Aparador de relva. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Makita. Eles podem fornecer um manual original. Você está procurando o manual do seu Makita DUR141 Aparador de relva em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Makita Aparadores de relva
Mais manuais de Aparadores de relva

Produtos relacionados

Manual

Makita DUR193 Aparador de relva

Manual

Makita DUR189 Aparador de relva

Manual

Makita DBC260L Aparador de relva

Manual

Makita DUR369LPT2 Aparador de relva

Manual

Makita DUR369AZ Aparador de relva

Manual

Makita DUR369A Aparador de relva

Manual

Makita BUR181 Aparador de relva

Manual

Makita DUR368AZ Aparador de relva

Categorias relacionadas