3
SAFETY INSTRUCTIONS
General Instructions
– To ensure correct and safe operation, the user must read, understand and
follow this instruction manual to assure familiarity with the handling of the
brush cutter. Users insufciently informed will risk danger to themselves as
well as others due to improper handling.
– It is recommended only to loan the brush cutter to people who have proven to
be experienced with brush cutters.
Always hand over the instruction manual.
– Use brush cutters with the utmost care and attention.
– First-time users should ask the dealer for basic instructions to familiarize
oneself with the handling of an engine powered cutter.
– Children and young persons aged under 18 years must not be allowed to
operate the brush cutter. Persons over the age of 16 years may however
use the tool for the purpose of being trained only while under the direct
supervision of a qualied trainer.
– Use brush cutters with the utmost care and attention.
– Operate the brush cutter only if you are in good physical condition. Perform
all work conscientiously and carefully. The user has to accept responsibility
for others.
– Never use the brush cutter while under the inuence of alcohol or drugs.
– Do not use the unit when you are tired.
– Save these instructions for future referral.
– National regulation can restrict the use of the machine.
Personal protective equipment
– The clothing worn should be functional and appropriate, i.e. it should be
tight-tting but not cause hindrance. Do not wear jewelry, clothing or long hair
which could become entangled with bushes or shrubs.
– In order to avoid head-, eye-, hand- or foot injuries as well as to protect your
hearing the following protective equipment and protective clothing must be
used during operation of the brush cutter.
– Always wear a helmet when working in the forest. The protective helmet (1)
is to be checed at regular intervals for damage and is to be replaced at least
every 5 years. Use only approved protective helmets.
– The visor (2) of the helmet (or approved goggles) protects the face from ying
sticks, stones or other object. During operation of the brush cutter always
wear goggles, or a visor to prevent eye injuries.
– Wear adequate noise protection equipment to avoid hearing impairment (ear
muffs (3), ear plugs etc.), especially during extended work periods.
– The work overalls (4) protect against ying stones and splinters.
We strongly recommend that the user wear work overalls.
– Special gloves (5) made of thick leather are part of the prescribed equipment
and must always be worn during operation of the brush cutter.
– When using the brush cutter, always wear sturdy shoes (6) with a non-slip
sole. This protects against injuries and ensures good footing.
Starting up the brush cutter
– Please make sure that there are no children or other people within a working
range of 50 ft. or 15 meters, also pay attention to any animals in the working
vicinity.
– Before operating, always check that the brush cutter is safe for
operation:
Check the security of the cutter blade. Be sure the blade mounting nut is
rmly secured. The throttle lever should be checked for smooth and easy
action. Check for proper functioning of the throttle lever lock. The cutter blade
must not rotate during idling.
Consult idle adjustment instructions on page 15. Check for clean and dry
handles and test the function of the STOP switch.
Keep handles free of oil and fuel.
– Before operation, check and follow local; regulations concerning sound level
and hours of operations.
– Only start the brush cutter positioned on the ground.
– Do not start it on the back.
Participe da conversa sobre este produto
Aqui você pode compartilhar o que pensa sobre Dolmar MS-352.4R Roçadora. Se você tiver alguma dúvida, primeiro leia atentamente o manual. A solicitação de manual pode ser feita através do nosso formulário de contato.