Manual Dolmar MS-352.4R Roçadora
Precisa de um manual para o seu Dolmar MS-352.4R Roçadora? Abaixo você pode visualizar e baixar gratuitamente o manual em PDF em português. Este produto tem atualmente 0 perguntas frequentes, 0 comentários e tem 0 votos. Se este não for o manual que você deseja, por favor contacte-nos.
Seu produto está com defeito e o manual não oferece solução? Vá a um Repair Café para obter serviços de reparo gratuitos.
Manual
Loading…
4
• Resting
• Transport
• Refueling
• Maintenance
• Tool replacement
Start the brush cutter only in accordance with the instructions.
Do not use any other methods for starting the engine!
– Use the brush cutter and the tools supplied only for applications specied.
– Start the brush cutter engine only after the entire tool has been assembled.
Operation of the tool is permitted only after all the appropriate accessories
are attached!
– Before starting, make sure that the cutter blade will not contact any objects
such as branches, stones, etc.
– The engine is to be stopped immediately if there are any engine problems.
– Should the cutter blade hit stones or any other objects immediately stop the
engine and inspect the cutter blade.
– Inspect the cutter blade at frequent regular intervals for damage (detect
hairline cracks by means of a tapping-noise test).
– A familiar ringing sound should be heard.
– Operate the brush cutter only with the shoulder strap attached. It should be
properly adjusted before putting the brush cutter into operation. It is essential
to adjust the shoulder strap to the user’s size to prevent fatigue occurring
during use or loss of control of the tool. Never hold the tool with one hand
during use.
– During operation always hold the brush cutter with both hands.
Always ensure a safe, well-balanced footing.
– Operate the brush cutter in such a manner as to avoid inhalation of the
exhaust gases. Never run the engine in enclosed rooms (risk of suffocation
and gas poisoning). Carbon monoxide is an odorless gas. Always ensure
there is adequate ventilation.
– Stop the engine when resting and when leaving the brush cutter unattended.
Place it in a sale location to prevent danger to others, setting re to
combustible materials, or damage to the machine.
– Never lay down the hot brush cutter onto dry grass or onto any combustible
materials.
– The cutter blade must be used with its appropriate guard. Never run the tool
without this guard!
– All protective parts and guards supplied with the machine must be used
during operation.
– Never operate the engine with a faulty exhaust mufer.
– Stop the engine during transport.
– When transporting the equipment, always attach the cover to the cutting
blade.
– Put the brush cutter in upright position and x it during care or truck
transportation to avoid damage.
– When transporting the brush cutter, ensure that the fuel tank is completely
empty, to avoid fuel leakage.
– If the equipment gets heavy impact or fall, check the condition before
continuing work. Check the fuel system for fuel leakage and the controls
and safety devices for malfunction. If there is any damage or doubt, ask our
authorized service center for the inspection and repair.
Refueling
– To reduce the risk of re and bum injury, handle fuel with care it is highly
ammable, Stop the engine during refuelling, keep well away from open
ame and do not smoke.
– Avoid skin contact with petroleum products. Do not inhale fuel vapor. Always
wear protective gloves during refuelling. Change and clean protective clothing
at regular intervals.
– Take care not to spill either fuel or oil. Always wipe unit dry before starting
engine. Allow wet cloths to dry before disposing in proper, covered container
to prevent spontaneous combustion.
– Avoid any fuel contact with your clothing. Change your clothing immediately if
fuel has spilled on it (danger hazard).
– Inspect the fuel cap at regular intervals making sure that stays securely
fastened.
– Carefully tighten the locking screw of the fuel tank. Change locations to start
the engine (at least 10ft. or 3 meters away from the place of refueling).
– Never refuel in closed rooms. Fuel vapors accumulate at ground level (risk of
explosions).
– Only transport and store fuel in approved containers. Make sure stored fuel is
not accessible to children.
– Do not attempt to refuel a hot or a running engine.
– When mixing gasoline with two-stroke engine oil, use only gasoline which
contains no ethanol or methanol (types of alcohol). This will help to prevent
damage to fuel lines and other engine parts.
Loading…
Avaliação
Deixe-nos saber o que você pensa sobre a Dolmar MS-352.4R Roçadora, deixando uma classificação do produto. Quer compartilhar suas experiências com este produto ou fazer uma pergunta? Por favor, deixe um comentário na parte inferior da página.Mais sobre este manual
Entendemos que é bom ter um manual em papel para o seu Dolmar MS-352.4R Roçadora. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Dolmar. Eles podem fornecer um manual original. Você está procurando o manual do seu Dolmar MS-352.4R Roçadora em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.
Especificações
| Marca | Dolmar |
| Modelo | MS-352.4R |
| Categoria | Roçadoras |
| Tipo de arquivo | |
| Tamanho do arquivo | 7.58 MB |
Todos os manuais para Dolmar Roçadoras
Mais manuais de Roçadoras
Participe da conversa sobre este produto
Aqui você pode compartilhar o que pensa sobre Dolmar MS-352.4R Roçadora. Se você tiver alguma dúvida, primeiro leia atentamente o manual. A solicitação de manual pode ser feita através do nosso formulário de contato.