Manual Zanussi ZHV94750BA Exaustor

Manual

2

www.zanussi.com

Recommendations

and suggestions

• The Instructions for Use apply

to several versions of this appli-

ance. Accordingly, you may nd

descriptions of individual features

that do not apply to your specic

appliance.

• The manufacturer will not be held

liable for any damages resulting

from incorrect or improper instal-

lation.

• The minimum safety distance

between the cooker top and the

extractor hood is 650 mm (some

models can be installed at a

lower height, please refer to the

paragraphs on working dimensions

and installation).

• Check that the mains voltage

corresponds to that indicated on

the rating plate xed to the inside

of the hood.

• For Class I appliances, check that

the domestic power supply guaran-

tees adequate earthing. Connect

the extractor to the exhaust ue

through a pipe of minimum diam-

eter 120 mm. The route of the

ue must be as short as possible.

• Do not connect the extractor hood

to exhaust ducts carrying combus-

tion fumes (boilers, replaces, etc.).

• If the extractor is used in conjunc-

tion with non-electrical appliances

(e.g. gas burning appliances),

a sufcient degree of aeration

must be guaranteed in the room

in order to prevent the backow

of exhaust gas. The kitchen must

have an opening communicating

directly with the open air in order

to guarantee the entry of clean air.

When the cooker hood is used

in conjunction with appliances

supplied with energy other than

electric, the negative pressure in

the room must not exceed 0,04

mbar to prevent fumes being

drawn back into the room by the

cooker hood.

• In the event of damage to the

power cable, it must be replaced

by the manufacturer or by the

technical service department, in

order to prevent any risks.

• If the instructions for installation

for the gas hob specify a greater

distance specied above, this has

to be taken into account. Regula-

tions concerning the discharge of

air have to be fullled.

• Use only screws and small parts

in support of the hood.

Warning: Failure to install the

screws or xing device in accord-

ance with these instructions may

result in electrical hazards.

• Connect the hood to the mains

through a two-pole switch having

a contact gap of at least 3 mm.

Use

• The extractor hood has been

designed exclusively for domestic

use to eliminate kitchen smells.

• Never use the hood for purposes

other than for which it has been

designed.

• Never leave high naked ames

under the hood when it is in op-

eration.

• Adjust the ame intensity to direct

it onto the bottom of the pan only,

EN

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Zanussi ZHV94750BA Exaustor. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Zanussi. Eles podem fornecer um manual original. Você está procurando o manual do seu Zanussi ZHV94750BA Exaustor em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Zanussi Exaustores
Mais manuais de Exaustores

Perguntas frequentes sobre Zanussi ZHV94750BA Exaustor

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.

Produtos relacionados

Manual

Zanussi ZHT530X Exaustor

Manual

Zanussi ZHC9244X Exaustor

Manual

Zanussi ZHC64X Exaustor

Manual

Zanussi ZH5612NX Exaustor

Manual

Zanussi ZHT620N Exaustor

Manual

Zanussi ZH6010W/E Exaustor

Manual

Zanussi ZFP216S Exaustor

Manual

Zanussi ZHT510X Exaustor

Categorias relacionadas