Manual Whirlpool WIS 1150 PEL Máquina de lavar louça

Manual

10

EN

OPTIONS AND SETTINGS

TABLET (All-in-one)

This setting allows you to optimise the performance of the cycle

according to the type of detergent used. Enable it if you use combined

detergents in tablet form (rinse aid, salt and detergent in 1 dose).

To set the Tablet, enter in the setting

menu by pressing „OK” button and

navigate with „< , >” until „TABLET”

is shown, then press „OK” button.

START DELAY

The start of the cycle may be delayed for a selected period of time.

To set a delay, enter in the setting menu by pressing „OK” button and na-

vigate with „< , >” until „START DELAY” is shown, then press „OK” button.

With each press of the button “>” or “<“, the delay start increases by:

• every 0:30 if selection below 4 hours,

• every 1:00 if selection is below 12 hours,

• every 2 hours if selection is above 12 hours.

Default value is OFF.

If delay is selected, the is lit.

Once „OK” button is pressed the

delay is conrmed and the machine

comes back to the cycle selection

screen with delay value visible.

Press „START” button and close the door within 4 sec. to start the delay.

To remove the delay, press „<” or „>” button until „OFF” is displayed.

MULTIZONE

If there are not many dishes to be washed it can be loaded in one rack

only. Using this option you can select which rack you want to wash.

To set the Multizone, enter in the setting menu by pressing „OK”

button and navigate with „< , >” until „MULTIZONE” is shown, then

press „OK” button.

By default the MULTIZONE is not

active and all racks icons are lit.

The multizone icon becomes lit.

The multizone icon becomes lit.

The multizone icon becomes lit.

Remember to load the upper or lower rack only, and to reduce

the amount of detergent accordingly.

If upper rack is removed, please apply detergent directly to tub

instead of detergent dispenser.

POWER CLEAN

Thanks to additional water jets this option provides a more intensive

and powerful wash in the specic area of lower rack.

Default value is OFF.

To set the Power Clean, enter in

the setting menu by pressing „OK

button and navigate with „< , >”

until „POWER CLEAN” is shown,

then press „OK” button.

TURBO

This option can be used to reduce the duration of the main cycles

while maintaining washing and drying performance levels.

To set the Turbo, enter in the setting

menu by pressing „OK” button and

navigate with „< , >” until „TURBO”

is shown, then press „OK” button.

With each press of the button

„>” or „<“ option will be ON or OFF.

Conrm by pressing „OK” button.

FLOOR LIGHT

A LED light projected on the oor indicates that the dishwasher is

working. The light stays on during the cycle and switches o at the

end of the cycle.

This feature is active by default, but it is possible to deactivate it in the

“SETTINGS MENU”.

TUB LIGHT

When the feature is active the LEDs in the tub are automatically

switched on/o as soon as the user open/close the door respectively.

If the door remains opened for more than 10 min, the LEDs in the

tub switch o (to turn them on again, the door has to be closed and

opened again).

This feature is active by default, but it is possible to deactivate it in the

“SETTINGS MENU”.

TABLET OFF

TABLET ON

TABLET ON

START DELAY OFF

<STARTS IN h> OFF

<STARTS IN h> 4:00

<STARTS IN h> 4:00

MULTIZONE OK

<CUTLERY ONLY>

<ALL RACKS> < >

<LOW ONLY> < >

<CUTLERY ONLY> < >

<HIGH ONLY> < >

POWER CLEAN OFF

POWER CLEAN ON

POWER CLEAN ON

TURBO OFF

TURBO ON

TURBO ON

With each cycle additional options can be used. A full list of available options working with specic cycles can be found in the Cycles Table on

the previous page. All active options are shown on the display.

To set an option press „OK” button. SET OPTIONS message is shown for a few seconds. Then use „<” or „>” button to navigate through the

option list. Press „OK” to select the option, in the setting menu the LED above „OK” button is lit.

If the option is not available, it will be still visible in its position but with „ ”

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Whirlpool WIS 1150 PEL Máquina de lavar louça. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Whirlpool. Eles podem fornecer um manual original. Você está procurando o manual do seu Whirlpool WIS 1150 PEL Máquina de lavar louça em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Whirlpool Máquinas de lavar louça
Mais manuais de Máquinas de lavar louça

Perguntas frequentes sobre Whirlpool WIS 1150 PEL Máquina de lavar louça

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.

Produtos relacionados

Manual

Whirlpool WSIO 3O23 PFE X Máquina de lavar louça

Manual

Whirlpool ADPF 883 IX Máquina de lavar louça

Manual

Whirlpool ADP 5653 WH Máquina de lavar louça

Manual

Whirlpool ADP AQUAFEEL Máquina de lavar louça

Manual

Whirlpool W7F HS41 X Máquina de lavar louça

Manual

Whirlpool WBC 3C26 B Máquina de lavar louça

Manual

Whirlpool WIE 2B16 Máquina de lavar louça

Manual

Whirlpool W2I HD526 A Máquina de lavar louça

Categorias relacionadas