Manual Virutex FR277R Tupia

Manual

8

5. PREPARING THE TOOL FOR MILLING

Always disconnect the plug from power

source before making any adjustments

or changing any accessory.

6. DUST SUCTION

Milling and grinding wood generate sawdust and dust

that endanger safety and health. Using dust suction

prevents air pollution for breathing and makes easier

removal of wastes.

7. MOUNTING DUST EXTRACTION ADAPTER

Put the dust extraction adapter 15 (Fig. 2) baseplate 3

(Fig. 2) so that the twin column guide A (Fig. 2) is inside

the mouth of the dust extraction adapter.

Push the mouth with the right hand thumb in the

direction A (Fig. 2) towards the locking edge C so that

the lock D on the periphery is automatically cought in

the edge B (Fig. 2)

Connect the hose of a vacuum cleaner directly to the

dust extraction adapter 15 (Fig. 3), or connect it with a

suction hose with a turning connection for extracting

dust 4 (Fig. 3).

Fix the latter into the corresponding place below the

motor cover.

Mount the upper dust extraction adapter by pushing

it in the directions C until it snaps between the motor

gerabox and the motor cover. Then attach the lower

part of the hose to the dust extraction adapter 15 in

the direction D (Fig. 3).

Turning connection enables better view of the milling

area and setting the vacuum cleaner hose in the most

favourable position. The diameter of the dust extrac-

tion adapter is 35 mm, which corresponds to hoses of

standard vacuum cleaners.

Using STANDARD DUST COLLECTOR ATTACHMENT

Ref.6446073 (optional), the router may be connected

to our AS182K, AS282K, AS382L aspirator or to any

other industrial aspirator via the aspiration connector.

8. REMOVING UPPER DUST

EXTRACTION ADAPTERS (Fig. 3)

With the hose can be removed by first taking off the hose

from the dust extraction adapter 15 in the direction E,

and then push with the left hand thumb the upper part

of the dust extraction adapter in the direction F (Fig. 3).

9. REMOVING LOWER DUST

EXTRACTION ADAPTERS (Fig. 2)

Take off the hose of the dust extraction adapter 4. Press

the lock D on the periphery of the adapter 15 that much

but immediately disconnect the plug.

• Always keep the mains lead away from moving parts

of the tool.

Direct the mais lead to the rear fo the tool.

• Use only extension cord that is intended for outdoor

use and equipped with a splash-proof coupling-socket.

Connect the tool via a fault current (FI) circuit beaker

with a triggering current of 30 mA maximum.

• Wires of the extension cable must have a minimum

section of 1,5 mm2 and the cable must be fully unwound.

• Plug in the tool only if the switch is turned off.

• Always wear personal protective equipment, glasses

and footwear.

• Always hold the router with both hands.

• Switch off the motor after you have finished milling.

• Before you put down the tool, loosen the router table.

• Always put down the tool on a horizontal and clean

surface.

• Do not put any other tools on the workpiece.

• Workpiece must be clean, without any rests of ma-

terials, sawdust...

• Work place should have adequte lights, it is forbiidden

to use the tool in rooms with inflammable substances

and gases, switch on/off the tool only by the switch and

not by disconnesting the plug.

• Be careful of screws, nails and other objects in the

workpiece while milling.

• Start working only when the tool has reached full speed.

• Be aware of the sudden impact when the FR277R and

FR278R power tool is switched on.

• Prevent unintentional switching on of the tool.

• Always use undamaged and sharp router bits.

• When you do not use the tool, store it in a dry place

protected from dust.

• Do not wear loose clothes of jewelry the tool could

take hold of and pull it towards it. If you have long hair,

wear a protective head-covering. When working outside,

wear non-skid footwear.

• In case the tool is blocked, immediately switch off the

tool and disconnect the plug.

• Clamp the workpiece.

• Guide only switched on tool towards the workpice.

Switch off the tool when you when you have lifted the

tool from the workpiece.

• Use only original parts and accessories.

4. PACKAGE CONTENTS

Router

Parallel guide

Compass

Wrench

Dust extraction adapter

Instructions for use, guarantee card

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Virutex FR277R Tupia. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Virutex. Eles podem fornecer um manual original. Você está procurando o manual do seu Virutex FR277R Tupia em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Virutex Tupias
Mais manuais de Tupias

Perguntas frequentes sobre Virutex FR277R Tupia

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.

Produtos relacionados

Manual

Virutex FRB300 Tupia

Manual

Virutex AB111N Tupia

Manual

Virutex FR192VG Tupia

Manual

Virutex FR217S Tupia

Manual

Virutex FR278R Tupia

Manual

Makita RP0900 Tupia

Manual

Black and Decker KW850E Tupia

Manual

Makita 3612C Tupia

Categorias relacionadas