Manual Tensai CEV350 Congelador

Manual

3

EN

Safety

ATTENTION

Read your manual carefully since it contains instructions which will

ensure safe installation, use and maintenance of your appliance.

Your freezer is built to International safety standards (2006/95/CE).

It also meets the standards on the prevention and elimination of radio

interference (2004/108/CE).

- The manufacturer reserves the right to modify the characteristics of the

models without prior notice.

- Some models may not have all the accessories indicated.

1. This appliance is designed to be used indoors and under no

circumstances should it be installed outside, even if protected by a roof.

Leaving the appliance exposed to the rain and whether is exceedingly

dangerous.

2. The appliance should be used only by adults and exclusively for

storing foodstuffs in compliance with the instructions provided in this

manual. Under no circumstances should children be allowed to operate,

or tamper with, this product.

3. Do not attempt to operate or handle this appliance when barefoot, or

with wet hands or feet.

4. It is highly recommended that you do not operate this appliance by

connecting it to the power supply with extensions or multiple socket

plugs. If the freezer has been installed between two cabinets, make sure

that the supply cord is not dangerously crimped or trapped beneath a

heavy object.

5. Never pull the cable or the appliance to remove the plug from the

socket; this is exceedingly dangerous.

6. Do not touch the internal cooling elements, especially if your hands are

wet, since you could burn or hurt yourself. Do not place ice cubes straight

from the freezer into your mouth as this may result in burns.

7. Before doing any cleaning, disconnect the appliance from the

electricity (by pulling out the plug or turning off the general switch in your

home).

8. Before disposing of your old appliance, remember to break or remove

the lock as a safety measure to protect children who might lock

themselves inside the appliance when playing. In addition, if the

appliance is a new one with a lock, keep the key out of the reach of small

children.

9. If your appliance is not operating properly, read the chapter entitled,

“Trouble Shooting”, which might help you resolve the problem. Do not

attempt to repair the appliance by tampering with the internal

components.

10. If the power supply cord must be replaced, please note that in some

cases, the connections are made using special terminals and in others a

special tool must be used to access the connections. This operation

should only be performed by an authorized agent.

11. Do not use electric appliances inside the compartment for food

storage, if these are not those recommended by the manufacturer.

12. At the end of the functional life of your appliance -containing

cyclopentane gas in the insulation foam and perhaps R600a gas

(isobutane) in the refrigeration circuit - it should be made safe before

being sent to the dump. For this operation, please contact your dealer or

the Local Organisation in charge of waste disposal.

Installation

To ensure that the appliance operates properly and to reduce

energy consumption, it is important that the appliance is installed

correctly.

Ventilation

The compressor and condenser generate heat and, therefore, need to be

ventilated properly. Rooms with no ventilation are not suited for

installation of the appliance. Therefore, it should be installed in a room

with an opening (window or French window) that provide the appropriate

amount of air re-circulation. It is also important to install it in a free

humidity room.

During installation, make sure not to cover or obstruct the grates that

allow for proper ventilation of the appliance. For proper ventilation of the

appliance, leave a space of at least 10 cm between the sides of the

appliance and any adjacent cabinets/walls.

Away from Heat

Avoid positioning the appliance in a place where it is directly exposed to

sunlight or near an oven, cook top or the like.

Electrical and Earth Connection

The appliance should not be turned on right after transportation. Two

hours is the advised time so that the oil from the motor-compressor gets

back to its original position.

Before proceeding with the electrical connection, make sure that the

voltage indicated on the rating plate, located inside the appliance,

corresponds to the mains voltage in your home and that the socket is

fitted with a standard earth wire in accordance with safety standards. If

the socket is not fitted with an earth wire, the manufacturer will not be

held liability for any damages and or injuries arising out of the use of the

appliance. Do not use multiple sockets or adapters.

Position the appliance in such a way that you can access the socket

where it is plugged in.

Insufficient power

The electrical socket must be able to handle the maximum power load of

the appliance, which is indicated on the rating plate located inside the

appliance.

The Appliance

A Temperature Adjustment Knob

Turning the knob will adjust the temperature inside the appliance.

B Warning Red Light

When this red warning light comes on for a prolonged period of time, it

means that the freezer is not functioning properly and the temperature is

too high.

This warning light may come on for a brief period when the door is left

open for an extended period of time (when the freezer is being loaded or

unloaded).

C Power Supply Indicator Light The green light will come on and stay

on while the appliance is connected and is operating normally.

D Fast Freeze Indicator Light

This yellow indicator light will come on when the switch E is in the

SUPER position.

E SUPER freezing position

The position Super, allows the compressor to function continuously in

order to reach the necessary temperatures for the rapid freezing of fresh

food. When the switch isn’t in this position, the unit is functioning

according to the thermostat regulation.

F Removable drawers

G Defrost water discharge hole

H Regulation feet

Setting Up The Appliance

Before starting the appliance, follow the installation instructions (see

“Installation”).

Before connecting the appliance, clean the compartments and

accessories with lukewarm water and bicarbonate.

Insert the plug into the socket.

Once the appliance has been connected to the power source, the green

C and red B lights will turn on. Turn the fast freeze switch E to the Super

setting (the yellow D light will turn on).

When the red B light turns off, turn the switch Super to OFF position and

change the temperature knob A to the required temperature setting. At

this point the freezer can be used.

NOTICE

Use average temperature settings to ensure optimum performance

and to save energy.

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Tensai CEV350 Congelador. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Tensai. Eles podem fornecer um manual original. Você está procurando o manual do seu Tensai CEV350 Congelador em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Tensai Congeladores
Mais manuais de Congeladores

Perguntas frequentes sobre Tensai CEV350 Congelador

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.

Produtos relacionados

Manual

Tensai HC170 Congelador

Manual

Tensai TCHEU240 Congelador

Manual

Tensai SIF320 Congelador

Manual

Tensai TCHEU100 Congelador

Manual

Tensai SIF240 Congelador

Manual

Tensai SIF370 Congelador

Manual

Tensai TCHEU310 Congelador

Manual

Tensai TCHEU370 Congelador

Categorias relacionadas