Manual Russell Hobbs 18276-56 Allure Liquidificadora

Manual

3

18 Don’t operate the appliance if it’s damaged or malfunctions.

19 If the cable is damaged, it must be replaced by the manufacturer, its service agent, or

someone similarly qualified, in order to avoid hazard.

household use only

preparation

1 Sit the motor unit on a dry, firm, level surface, near a power socket.

3 Hold the jug above the motor unit, with the handle about µ of a turn anti-clockwise of the

light.

4 Lower the jug on to the motor unit, then turn the jug clockwise, to align the handle with the

light.

5 Turn the lid about µ of a turn anti-clockwise to unlock it, and lift it off the jug.

6 Put the ingredients into the jug.

7 Don’t fill past the 1500ml mark. If you do, the contents may force the lid off when you start

the motor.

fit the lid

8 Put the lid on the jug, and turn it clockwise to close it and operate the safety switch.

9 Align the pips on the sides of the cap with the slots in the hole in the lid, put the cap into the

hole, and turn it about µ of a turn clockwise to lock it.

10 Don’t run the appliance without fitting the cap.

switch on

11 Put the plug into the power socket.

12 Press and release the 3 button.

a) the light will come on

b) the display will show 0

the speed controls

13 Press u to increase, d to decrease the speed.

14 The range is from 1 (low) to 12 (high).

15 The motor turns off when the display shows 0.

16 To stop quickly, press 3.

17 Generally, large quantities, thick mixes, and a high ratio of solids to liquids suggest longer

timings and slower speeds.

18 Smaller quantities, thinner mixes, and more liquids than solids suggest shorter timings and

higher speeds.

19 Don’t run the motor continuously for more than 2 minutes, it may overheat. After 2 minutes

switch off for at least 2 minutes, to recover.

20 The most efficient way is to blend for a short time, stop and examine the results, then blend

again: blend – look – blend, till you achieve the result you want.

the pulse button Y

21 Pressing the pulse button (Y) will over-ride the speed set by the speed buttons, and give you

a burst of high speed.

22 When you release the Y button, the motor returns to the set speed.

23 You can also use it independently of the speed buttons.

instructions

drawings

1 pips

2 cap

3 slots

4 hole

5 lid

6 bayonet fitting

7 safety switch

8 jug

9 handle

10 jug base

11 seal

12 blades

13 blade unit

14 display

15 light

16 switch

17 motor unit

18 unlock

19 lock

20 blade unit (upside down)

21 jug base (underneath)

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Russell Hobbs 18276-56 Allure Liquidificadora. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Russell Hobbs. Eles podem fornecer um manual original. Você está procurando o manual do seu Russell Hobbs 18276-56 Allure Liquidificadora em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Russell Hobbs Liquidificadoras
Mais manuais de Liquidificadoras

Perguntas frequentes sobre Russell Hobbs 18276-56 Allure Liquidificadora

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.

Produtos relacionados

Manual

Russell Hobbs 18991-56 Desire Jug Liquidificadora

Manual

Russell Hobbs 22340-56 Liquidificadora

Manual

Russell Hobbs 23470-56 Liquidificadora

Manual

Russell Hobbs 21350-56 Liquidificadora

Manual

Russell Hobbs 25710 Liquidificadora

Manual

Russell Hobbs 25192 Liquidificadora

Manual

Russell Hobbs 24721 Liquidificadora

Manual

Jocel CH-7103A Liquidificadora

Categorias relacionadas