Manual Powerworks PD60CS40 Motosserra

Manual

English (original instructions)

EN

DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET

WARNING

Remove the battery pack from the chain

saw before checking the chain tension or

making adjustments to the chain. Wear

protective gloves while touching the chain,

bar or areas around the chain.

 Pull the chain in the middle of the lower

side of the bar away from the bar. The

gap between the cutter in the chain and

the bar should be between 3mm - 4mm.

 If you need to adjust the chain tension,

please refer to the section “ADJUSTING

THE CHAIN TENSION” later in this

manual.

TO INSTALL BATTERY PACK

See Figure 2.

 Align the battery pack with the battery

compartment on the chain saw.

 Grasp the chain saw firmly.

 Push the battery pack into the battery

compartment until the latch locks into

place.

 You should hear a "click" once the battery

is installed.

TO REMOVE BATTERY PACK

See Figure 2.

 Press the battery release button on the

chain saw. This will cause the battery to

raise out of the tool slightly.

 Grasp the chain saw firmly, and pull the

battery pack out of handle.

CHECKING THE CHAIN LUBRICANT

See Figure 2.

 Check the amount of oil in the chain saw

by looking at the oil level gauge. If the

oil level is low, follow the steps shown

in section “ADDING CHAIN & BAR

LUBRICANT” of this manual.

WARNING

Check the chain tension before each use

of the saw.

WARNING

Never operate the chain saw without

sufcient chain lubrication as this might

damage the saw and is a threat to safety.

Check the chain lubricant level before each

use!

In order to prevent kickback, please follow

these safety instructions:

 Never cut with the tip of the guide bar! Be

careful when continuing from previous

cuts.

 Always start cutting only when the chain

saw is already running.

 Make sure that the saw chain is always

properly sharpened.

 Never cut through more than one branch

at a time! When lopping off branches, be

careful not to touch any other branches.

 When cross-cutting, pay attention to

trunks standing very close to each other.

If possible, use a sawing trestle.

HOLDING THE CHAIN SAW See figure 8

Always hold the chain saw with your right

hand at the rear handle and your left hand at

the front handle.

Grip both handles with the thumbs and the

fingers around. Ensure that your left hand is

holding the front handle so that your thumb is

underneath.

STARTING OPERATION

 Before starting for operation, you should

install the battery pack in the machine.

 Press the on/off switch, this makes the

switch trigger operational. starting for

operation.

 Start the machine: Press the Safety lock-

off button, and then press the switch

trigger.

3

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Powerworks PD60CS40 Motosserra. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Powerworks. Eles podem fornecer um manual original. Você está procurando o manual do seu Powerworks PD60CS40 Motosserra em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Powerworks Motosserras
Mais manuais de Motosserras

Perguntas frequentes sobre Powerworks PD60CS40 Motosserra

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.

Produtos relacionados

Manual

Powerworks PD60PS Motosserra

Manual

Makita UC025G Motosserra

Manual

Worx WG349E Motosserra

Manual

Makita DUC355PG2J Motosserra

Manual

Worx WG324E Motosserra

Manual

Makita DUA200 Motosserra

Manual

Makita UC012G Motosserra

Manual

Greenworks GD24X2CS36 Motosserra

Categorias relacionadas