Manual Philips GC3591 Ferro

Manual



If you need service or information or if you have a problem, please visit the Philips

website at www.philips.com or contact the Philips Consumer Care Centre in your

country (you find its phone number in the worldwide guarantee leaflet). If there is

no Consumer Care Centre in your country, go to your local Philips dealer.



This chapter summarises the most common problems you could encounter with the

appliance. If you are unable to solve the problem with the information below, contact

the Consumer Care Centre in your country.

Problem Possible cause Solution

The iron is

plugged in, but

the soleplate

stays cold.

There is a connection

problem.

Check the mains cord, the plug and the

wall socket.

The temperature dial is

set to MIN.

Set the temperature dial to the required

position

The iron does

not produce

any steam.

There is not enough

water in the water

tank.

Fill the water tank (see chapter ‘Preparing

for use’, section ‘Filling the water tank).

The steam control is

set to position 0.

Set the steam control to a position

between 1 and 4 (see chapter ‘Using the

appliance’, section ‘Steam ironing’).

The iron is not hot

enough and/or the

drip-stop function has

been activated (specific

types only).

Set an ironing temperature that is

suitable for steam ironing (2 to MAX).

Put the iron on its heel and wait until the

amber temperature light goes out before

you start ironing.

Water

droplets drip

onto the fabric

during ironing.

The temperature

dial has been set to a

temperature that is too

low for steam ironing.

Set an ironing temperature that is

suitable for steam ironing (temperature

settings 2 to MAX). Put the iron

on its heel and wait until the amber

temperature light goes out.

You have put an additive

in the water tank.

Rinse the water tank and do not put any

additive in the water tank.

You have not closed

the cap of the filling

opening properly.

Press the cap until you hear a click.

Flakes and

impurities

come out of

the soleplate

during ironing.

Hard water forms

flakes inside the

soleplate.

Use the Calc-Clean function one or

more times (see chapter ‘Cleaning

and maintenance’, section ‘Calc-Clean

function’).

The

temperature

light flashes

red (specific

types only).

The automatic shut-off

function has switched

off the iron (see

chapter ‘Features’).

Move the iron slightly to deactivate the

automatic shut-off function. The red

auto-off indication of the temperature

light goes out.

Water drips

from the

soleplate after

the iron has

cooled down

or has been

stored (specific

types only)

You have put the iron

in horizontal position

while there was still

water in the water

tank.

Always set the steam control to position

0 and empty the water tank after use.

Store the iron on its heel.

The iron does

not produce a

steam boost.

You used the steam

boost function too

often within a short

period.

Continue ironing in horizontal

position and wait a while before you use

the steam boost function again..

The iron is not hot

enough.

Set an ironing temperature at which

the steam boost function can be used

(temperature settings 2 to MAX). Put

the iron on its heel and wait until the

amber temperature light goes out before

you use the steam boost function.



The automatic shut-off function automatically switches off the iron if it has not been

moved for a while.

, The red auto-off indication of the temperature light flashes to indicate that the

iron has been switched off by the automatic shut-off function (Fig. 6).

To let the iron heat up again:

1 Pick up the iron or move it slightly

, The red auto-off indication goes out.

, If the temperature of the soleplate has dropped below the set ironing

temperature, the amber temperature light goes on.

2 If the amber temperature light goes on after you have moved the iron, wait for it

to go out before you start ironing.

Note: If the amber temperature light does not go on after you move the iron, the soleplate

still has the right temperature and the iron is ready for use.

Cleaning and maintenance

Cleaning

1 Set the steam control to position 0, remove the plug from the wall socket and let

the iron cool down.

2 Wipe flakes and any other deposits off the soleplate with a damp cloth and a

non-abrasive (liquid) cleaning agent.

To keep the soleplate smooth, avoid hard contact with metal objects. Never use a

scouring pad, vinegar or other chemicals to clean the soleplate.

3 Clean the upper part of the iron with a damp cloth.

4 Regularly rinse the water tank with water. Empty the water tank after you have

rinsed it (Fig. 12).



The Double-Active Calc System consists of an Anti-Calc tablet inside the water tank

combined with the Calc-Clean function.

1 The Anti-Calc tablet prevents scale from clogging the steam vents. This tablet is

constantly active and does not need to be replaced (Fig. 13).

2 The Calc-Clean function removes the scale particles from the iron.



Use the Calc-Clean function once every two weeks. If the water in your area is very

hard (i.e. when flakes come out of the soleplate during ironing), use the Calc-Clean

function more frequently.

1 Make sure the appliance is unplugged.

2 Set the steam control to position 0.

3 Fill the water tank to the maximum level.

Do not pour vinegar or other descaling agents in the water tank.

4 Set the temperature dial to MAX.

5 Put the mains plug in an earthed wall socket.

6 Unplug the iron when the temperature light goes out.

7 Hold the iron over the sink, press and hold the Calc-Clean button and gently

shake the iron to and fro (Fig. 14).

, Steam and boiling water come out of the soleplate. Impurities and flakes (if any)

are flushed out.

8 Release the Calc-Clean button as soon as all the water in the tank has been used up.

9 Repeat the Calc-Clean process if the iron still contains a lot of impurities.



1 Put the plug back into the wall socket and let the iron heat up to let the

soleplate dry.

2 Unplug the iron when the temperature light goes out.

3 Move the iron gently over a piece of used cloth to remove any water stains that

may have formed on the soleplate.

4 Let the iron cool down before you store it.

Storage

1 Set the steam control to position 0, remove the plug from the wall socket and let

the iron cool down.

2 Wind the mains cord round the cord storage facility (Fig. 15).

3 Store the iron on its heel in a safe and dry place.



- Do not throw away the appliance with the normal household waste at the end

of its life, but hand it in at an official collection point for recycling. By doing this,

you help to preserve the environment (Fig. 16).

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Philips GC3591 Ferro. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Philips. Eles podem fornecer um manual original. Você está procurando o manual do seu Philips GC3591 Ferro em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Philips Ferros
Mais manuais de Ferros

Perguntas frequentes sobre Philips GC3591 Ferro

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.

Produtos relacionados

Manual

Philips GC9648 PerfectCare Elite Silence Ferro

Manual

Philips GC4549 Ferro

Manual

Philips GC9241 Ferro

Manual

Philips HI5922 Ferro

Manual

Philips GC9235 PerfectCare Ferro

Manual

Philips GC8703 Ferro

Manual

Philips GC9550 Ferro

Manual

Philips DST7020 Ferro

Categorias relacionadas