Manual Philips GC2860 Ferro

Manual

Problem Cause Solution

The iron is plugged

in, but the soleplate

is cold.

There is a connection

problem.

Check the mains cord, the plug and the

wall socket.

The temperature dial is set

to MIN.

Set the temperature dial to the required

position.

The iron does not

produce any steam.

There is not enough water

in the water tank.

Fill the water tank (see chapter ‘Preparing

for use’, section ‘Filling the water tank’).

The steam control is set to

position 0.

Set the steam position to $ or &

(see chapter ‘Using the appliance’, section

‘Steam ironing’).

The iron is not hot

enough and/or the drip-

stop function has been

activated.

Set an ironing temperature that is suitable

for steam ironing (

2 to MAX). Put

the iron on its heel and wait until the

temperature light goes out before you

start ironing.

The steam

boost function

does not work

properly.

You have used the steam

boost function too often

within a very short period.

Continue ironing in horizontal position

and wait a while before you use the

steam boost function again.

The iron is not hot enough. Set an ironing temperature at which the

steam boost function can be used (

3

to MAX). Put the iron on its heel and

wait until the temperature light goes out

before you use the steam boost function.

Flakes and

impurities come

out of the soleplate

during ironing.

Hard water forms akes

inside the soleplate.

Use the Calc-Clean function one or

more times (see chapter ‘Cleaning

and maintenance’, section ‘Calc-Clean

function’).

The light on the

handle ashes

(GC2860 only).

The automatic shut-off

function has been activated

(see chapter ‘Features’,

section ‘Automatic shut-

off’).

Pick the iron up or move it slightly to

deactivate the automatic shut-off function.

The automatic shut-off light goes out.

Water droplets

drip on the fabric

during ironing.

You have not closed the

cap of the lling opening

properly.

Press the cap until you hear a click.

The set temperature is too

low for steam ironing.

Set an ironing temperature that is suitable

for steam ironing (

2 to MAX). Put

the iron on its heel and wait until the

temperature light goes out before you

start ironing.

You have put an additive in

the water tank.

Rinse the water tank and do not put any

additive in the water tank.

You have used the steam

boost function at a setting

below

3.

Set the temperature dial to a setting

between

3 and MAX.

You have used the steam

boost function too often

within a short period.

Continue ironing in horizontal position

and wait a while before you use the

steam boost function again.

Water drips from

the soleplate after

the iron has cooled

down or has been

stored.

You have put the iron in

horizontal position while

there was still water in the

water tank.

Empty the water tank and set the steam

control to position 0 after use. Store the

iron on its heel.

Water spots

appear on the

garment during

ironing.

These wet spots may

be caused by steam that

has condensed onto the

ironing board.

Iron wet spots without steam from time

to time to dry them.

If the underside of the

ironing board is wet, wipe

it dry with a piece of dry

cloth.

To prevent steam from condensing onto

the ironing board, use an ironing board

with wire mesh top.

Calc-Clean function

Use the Calc-Clean function once every two weeks. If

the water in your area is very hard (i.e. when akes come

out of the soleplate during ironing), use the Calc-Clean

function more frequently.

1 Make sure the appliance is unplugged.

2 Set the steam control to position 0.

3 Fill the water tank to the maximum level.

Do not pour vinegar or other descaling agents into the

water tank.

4 Set the temperature dial to MAX (Fig. 11).

5 Put the mains plug in an earthed wall socket.

6 Unplug the iron when the temperature light goes

out.

7 Hold the iron over the sink. Push the steam control

to the Calc-Clean position and hold it. Gently shake

the iron to and fro (Fig. 12).

, Steam and boiling water come out of the soleplate.

Impuritiesandakes(ifany)areushedout.

8 Release the steam control as soon as all the water

in the tank has been used up.

9 Repeat the Calc-Clean process if the iron still

contains a lot of impurities.

After the Calc-Clean process

1 Put the plug back into the wall socket and let the

iron heat up to let the soleplate dry.

2 Unplug the iron when the temperature light goes

out.

3 Move the iron gently over a piece of used cloth to

remove any water stains that may have formed on

the soleplate.

Storage

1 Set the steam control to position 0, remove the

plug from the wall socket and let the iron cool

down.

2 Wind the mains cord round the cord storage

facility (Fig. 13).

3 Store the iron on its heel in a safe and dry place.

Environment

- Do not throw away the appliance with the normal

household waste at the end of its life, but hand it in

at an ofcial collection point for recycling. By doing

this, you help to preserve the environment (Fig. 14).

Guarantee & service

If you need service or information or if you have a

problem, please visit the Philips website at www.philips.

com or contact the Philips Consumer Care Centre

in your country (you nd its phone number in the

worldwide guarantee leaet). If there is no Consumer

Care Centre in your country, go to your local Philips

dealer.

Troubleshooting

This chapter summarises the most common problems

you could encounter with the appliance. If you are unable

to solve the problem with the information below, contact

the Consumer Care Centre in your country.

2

4239.000.7162.2

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Philips GC2860 Ferro. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Philips. Eles podem fornecer um manual original. Você está procurando o manual do seu Philips GC2860 Ferro em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Philips Ferros
Mais manuais de Ferros

Perguntas frequentes sobre Philips GC2860 Ferro

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.

Produtos relacionados

Manual

Philips GC9647 PerfectCare Ferro

Manual

Philips DST7061 Ferro

Manual

Philips GC8703 Ferro

Manual

Philips GC8960 Ferro

Manual

Philips GC2560 Ferro

Manual

Philips GC9670 PerfectCare Ferro

Manual

Philips DST8030 Azur Ferro

Manual

Philips GC9315 Ferro

Categorias relacionadas