Manual McCulloch B33 B Aparador de relva

Manual

loaded START/STOP switch and can be started by

low speed and force on the starter handle, even

small children under some circumstances can

produce the force necessary to start the machine.

This can mean a risk of serious personal injury.

Therefore remove the spark plug cap when the

machine is not under close supervision.

Personal protective equipment

! You must use approved personal protective

equipment whenever you use the machine.

Personal protective equipment cannot eliminate the

risk of injury but it will reduce the degree of injury if

an accident does happen. Ask your dealer for help

in choosing the right equipment.

! Listen for warning signals or shouts when you are

wearing hearing protection. Always remove your

hearing protection as soon as the engine stops.

! Wear a helmet if the brush to be cleared is taller

than 2 meters (6 feet).

! Wear hearing protection that reduces noise

suf• ciently.

! Always wear approved eye protection. If you use a

visor then you must also wear approved protective

goggles. Approved protective goggles must obey

EN 166 in Europe, ANSI Z87 in the United States,

and CSA Z94 in Canada.

! Wear gloves when necessary, such as when you

touch sharp parts or objects.

! Wear anti-slip and stable boots.

! Wear clothes made of a strong fabric.

! Do not wear loose clothing that can catch on shrubs

and branches.

! Always wear heavy, long pants.

! Do not wear jewelry, shorts, sandals or have bare

feet.

! Safety hair so it is above shoulder level.

! Have a • rst aid kit available.

Safety features

This section describes the unit's safety equipment, its

purpose, and how checks and maintenance must be

carried out to ensure that it operates correctly. See

the #WHAT IS WHAT# section to locate where this

equipment is positioned on your unit.

The life span of the unit can be decreased and the

risk of accidents can increase if maintenance is not

carried out correctly and if service and/or repairs

are not carried out professionally. If you need further

information please contact your nearest service

workshop.

IMPORTANT: All servicing and repair work on the

unit requires special training. This is especially true

of the unit's safety equipment. If your unit fails any of

the checks described below you must contact your

service agent. When you buy any of our products

we guarantee the availability of professional repairs

and service. If the retailer who sells your unit is not

a servicing dealer, ask him for the address of your

nearest service agent.

aWARNING: Do not use a unit that has faulty

safety equipment.

Follow the control, maintenance and service

instructions described in this section. If your unit fails

any of these checks contact your service agent to get

it repaired.

n Throttle lock-out

The throttle lock-out is designed to prevent accidental

operation of the throttle control. When you press the

lock-out (i.e. when you grasp the handle) it releases

the throttle control. When you release the handle, the

throttle control and the throttle lock-out both move

back to their original positions.

Make sure the throttle control is locked when the

throttle lock-out is released.

Pre

ss the throttle lock-out and make sure it returns to

its original position when you release it.

Check that the throttle control and throttle lock-out

move freely and that the return springs work properly.

When you operate the unit at full throttle, release the

throttle and check that the cutting attachment stops

and remains at a standstill. If the cutting attachment

rotates with the throttle in the idle position then the

carburetor idle setting must be checked.

n ST

ART/STOP switch

Make sure the engine stops when you move the

STA

RT/STOP switch to the “STOP” position.

n Cutting attachment guard

This guard is intended to prevent loose objects from

being thrown towards the operator. The guard also

protects the operator from accidental contact with the

cutting attachment.

Check that the guard is undamaged and not cracked.

Replace the guard if it has been exposed to impact or

is cracked.

Always use the speci• ed guard for the cutting

attachment you are using. See the #TECHNICAL

DATA# section.

aWARNING: Do not use a cutting attachment

without an approved guard. See the “TECHNICAL

DATA” section. If an incorrect or faulty guard is

• tted this can cause serious personal injury.

Use of incorrectly wound trimmer line or an incorrect

cutting attachment increases the level of vibration.

aWARNING: Overexposure to vibration can

lead to circulatory damage or nerve damage in

people who have impaired circulation. Contact

your doctor if you experience symptoms of

overexposure to vibration. Such symptoms

include numbness, loss of feeling, tingling,

pricking, pain, loss of strength, changes in skin

color or condition. These symptoms normally

appear in the • ngers, hands or wrists. The risk

increases at low temperatures.

4

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu McCulloch B33 B Aparador de relva. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com McCulloch. Eles podem fornecer um manual original. Você está procurando o manual do seu McCulloch B33 B Aparador de relva em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para McCulloch Aparadores de relva
Mais manuais de Aparadores de relva

Produtos relacionados

Manual

McCulloch B26 PS Aparador de relva

Manual

McCulloch T22 LS Aparador de relva

Manual

McCulloch T22 LCS Aparador de relva

Manual

McCulloch B428 PS Aparador de relva

Manual

Husqvarna 122C Aparador de relva

Manual

Stayer Cutty 600 Aparador de relva

Manual

Cramer 82TB16 Aparador de relva

Manual

Dolmar AT-3726L Aparador de relva

Categorias relacionadas