Manual Makita JR3000 Serra sabre

Manual

ENGLISH

Explanation of general view

1 Hex wrench

2 Bolt

3 Shoe

4 Bolt

5 Speed change switch

6 Switch trigger

7 Lock button/Lock-off button

8 Speed control screw

9 High

0 Low

q Limit mark

w Brush holder cap

e Screwdriver

SPECIFICATIONS

Model JR3000 JR3000V

Length of stroke .......................................................................... 30 mm 30 mm

Strokes per minute ...................................................................... Hi : 2,500 Low : 1,900 0 – 2,300

Overall length .............................................................................. 400 mm 400 mm

Net weight ................................................................................... 2.9 kg 2.9 kg

•

Due to the continuing program of research and

development, the specifications herein are subject

to change without prior notice.

•

Note: Specifications may differ from country to

country.

Power supply

The machine should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

Safety hints

For your own safety, please refer to enclosed Safety

instructions.

These symbols mean:

Read instruction manual.

DOUBLE INSULATION

ADDITIONAL SAFETY RULES

1. Avoid cutting nails. Inspect for and remove all

nails from the workpiece before operation.

2. Do not cut oversize workpiece.

3. Check for the proper clearance beyond the

workpiece before cutting so that the blade will

not strike the floor, workbench, etc.

4. Hold the machine firmly.

5. Make sure the blade is not contacting the

workpiece before the switch is turned on.

6. Keep hands away from moving parts.

7. When cutting through walls, floors or wher-

ever ‘‘live’’ electrical wires may be encoun-

tered, DO NOT TOUCH ANY METAL PARTS OF

THE MACHINE! Hold the machine by the insu-

lated grasping surfaces to prevent electric

shock if you cut through a ‘‘live’’ wire.

8. Do not leave the machine running. Operate the

machine only when hand-held.

9. Always switch off and wait for the blade to

come to a complete stop before removing the

blade from the workpiece.

10. Do not touch the blade or the workpiece imme-

diately after operation; they may be extremely

hot and could burn your skin.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Installing saw blade (Fig. 1)

Important:

Always be sure that the machine is switched off and

unplugged before installing or removing the blade.

First, use the hex wrench to loosen the bolt. With the

blade teeth facing upward or downward, insert the

blade until the hole in the blade shank is just over the

protrusion on the slider. Then tighten the bolt to

secure the blade.

Adjusting shoe (Fig. 2)

Loosen the two bolts holding the shoe. Then slide the

shoe back or forth to the desired position and tighten

the two bolts securely. When the blade loses its

cutting effectiveness in one place, reposition the shoe

to obtain better cutting in another.

Speed change (For JR3000 only) (Fig. 3)

CAUTION:

Use the speed change switch only after the machine

comes to a complete stop.

To change the machine speed, move the speed

change switch to the ‘‘L’’ position for low speed or the

‘‘H’’ position for high speed.

High speed: ordinary wood, plys or plastics

Low speed: metals (steel pipe, sheet metal, stainless

or copper)

Switch action (For JR3000) (Fig. 4)

CAUTION:

Before plugging the machine, always check to see

that the switch trigger actuates properly and returns to

the ‘‘OFF’’ position when released.

JR3000 (Eng) (’96. 3. 22)

3

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Makita JR3000 Serra sabre. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Makita. Eles podem fornecer um manual original. Você está procurando o manual do seu Makita JR3000 Serra sabre em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Makita Serras sabre
Mais manuais de Serras sabre

Perguntas frequentes sobre Makita JR3000 Serra sabre

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.

Produtos relacionados

Manual

Makita BJR181 Serra sabre

Manual

Makita BJR182 Serra sabre

Manual

Makita JR3000V Serra sabre

Manual

Makita DJR360ZK Serra sabre

Manual

Makita JR180D Serra sabre

Manual

Makita BJR240 Serra sabre

Manual

Makita JR3030T Serra sabre

Manual

Makita BJR141 Serra sabre

Categorias relacionadas