Manual Makita 6821 Aparafusadora

Manual

ENGLISH

Explanation of general view

1 Locator

2 Locking sleeve

3 Bit

4 Magnetic bit holder

5 Switch trigger

6 Lock button

7 Reversing switch lever

8 Clockwise rotation

9 Counterclockwise rotation

SPECIFICATIONS

Model 6821

Capacities

Self drilling screw .......................................... 6 mm

Drywall screw ................................................ 5 mm

Bit shank size ............................................. 1/4’’ Hex

No load speed (RPM) ................................ 0 – 4,000

Overall length ............................................... 273 mm

Net weight ....................................................... 1.3 kg

•

Due to the continuing program of research and

development, the specifications herein are subject

to change without prior notice.

•

Note: Specifications may differ from country to

country.

Power supply

The machine should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

Safety hints

For your own safety, please refer to enclosed safety

instructions.

These symbols mean:

Read instruction manual.

DOUBLE INSULATION

ADDITIONAL SAFETY RULES

1. Always be sure you have a firm footing.

Be sure no one is below when using the

machine in high locations.

2. Hold the machine firmly.

3. Keep hands away from rotating parts.

4. When driving into walls, floors or wherever

‘‘live’’electrical wires may be encountered. DO

NOT TOUCH ANY METAL PARTS OF THE

MACHINE!

Hold the machine by the insulated grasping

surfaces to prevent electric shock if you drive

into a ‘‘live’’ wire.

5. Do not touch the bit or the workpiece immedi-

ately after operation; they may be extremely

hot and could burn your skin.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Removing or installing the bit (Fig.1&2)

Important:

Always be sure that the machine is switched off and

unplugged before removing or installing the bit.

Pull the locator out of the locking sleeve while turning

the locator slightly. Then grasp the bit with a pair of

pliers and pull the bit out of the magnetic bit holder.

Sometimes, it helps to wiggle the bit with the plires as

you pull.

To install the bit, push the bit firmly into the magnetic

bit holder. Then install the locator by pushing it firmly

onto the locking sleeve while turning the locator

slightly.

Depth adjustment (Fig. 3,4&5)

Adjust the locator by turning the locking sleeve. One

full turn of the locking sleeve moves the locator 2 mm.

Initially, adjust the locator so that the tip of the locator

is flush with the base of the screw head. Drive a trial

screw into your material or a piece of duplicate

material. If the depth is not suitable for the screw,

continue adjusting until the proper depth setting is

obtained.

Switch action (Fig. 6)

CAUTION:

Before plugging in the machine, always check to see

that the switch trigger actuates properly and returns to

the ‘‘OFF’’ position when released.

To start the machine, simply pull the trigger. Machine

speed is increased by increasing pressure on the

trigger. Release the trigger to stop.

For continuous operation, pull the trigger and then

push in the lock button. To stop the machine from the

locked position, pull the trigger fully, then release it.

Reversing switch action (Fig. 7)

This machine has a reversing switch to change the

direction of rotation. Move the reversing switch lever

to the ‘‘

’’ position for clockwise rotation or the

‘‘

’’ position for counterclockwise rotation.

CAUTION:

•

Always check the direction of rotation before opra-

tion.

•

Use the reversing switch only after the machine

comes to a complete stop. Charging the direction of

rotation before the machine stops may damage the

machine.

6821(Eng) (’96. 10. 7)

3

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Makita 6821 Aparafusadora. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Makita. Eles podem fornecer um manual original. Você está procurando o manual do seu Makita 6821 Aparafusadora em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Makita Aparafusadoras
Mais manuais de Aparafusadoras

Perguntas frequentes sobre Makita 6821 Aparafusadora

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.

Produtos relacionados

Manual

Makita 6705DW Aparafusadora

Manual

Makita 6836 Aparafusadora

Manual

Makita BFL201F Aparafusadora

Manual

Makita 6835D Aparafusadora

Manual

Makita BFT040F Aparafusadora

Manual

Makita AR410HR Aparafusadora

Manual

Makita DFT082R Aparafusadora

Manual

Makita DFS452 Aparafusadora

Categorias relacionadas