Manual Klipsch RP-1600SW Subwoofer

Manual

CONNECTIONS AND CONTROLS

CAUTION: Ensure that the subwoofer is unplugged from the AC wall outlet

before making any connections.

“LINE IN” Connection - Most of today’s surround receivers (and pre-

amplifiers) have a line level subwoofer output labeled Subwoofer Pre Out,

Sub Out, SW Out, etc. If you have this output, connect one end of a subwoofer

cable to it and connect the other end of the cable into the subwoofer line

input labeled L/LFE. This connection allows the subwoofer to operate with

both music and surround sound movies (refer to your receiver manual). In

absence of a subwoofer output on your receiver, as an alternative hookup,

you can connect Left and Right channel Pre-Amp Outputs from your receiver

(if provided) to the L/LFE and R inputs on the subwoofer.

WA-2 Port Connection - For wireless connectivity of your new Klipsch

Reference Premiere subwoofer, the optional WA-2 Wireless subwoofer kit is

available. The WA-2 will only operate with select Klipsch, Energy, Mirage and

Jamo brand subwoofers that have a “WA Port” input. The WA-2 is a 2.4 GHz

product designed to wirelessly transmit a signal up to a 50 foot radius. See

klipsch.com for more details.

Level - If your subwoofer is connected to a Subwoofer Output of a surround

receiver, first set the subwoofer volume level control in the receiver to the

“half way” or “0 dB” position. Then increase the volume (or gain) of the

subwoofer up until the subwoofer’s volume level matches the output of your

main speakers. After this setup is completed, the volume control on your

system’s main amplifier or pre-amplifier will be the volume control for both

your subwoofer and speakers together. If your subwoofer is connected to the

L/R Pre-Amp Outputs of a receiver there will be no subwoofer volume in that

receiver to set before setting the subwoofer’s gain control.

“LOWPASS” Control - The crossover point chosen determines where low

bass frequencies are “handed off” from the speakers to the subwoofer. If

setting the crossover point in the receiver, turn the Lowpass Filter knob on

the subwoofer to the farthest point right (160Hz). Set the crossover point

based on the size of the main left/right speakers you are using in the system.

As a general rule, for larger, floorstanding speakers, set the crossover point

between 50Hz-90Hz. If using small bookshelf or “satellite” speakers for

the mains, set the crossover point between 90Hz-150Hz. The smaller the

speaker, the higher the setting until the bass frequencies blend well between

the speakers and your subwoofer once your system is completely hooked

up. If your receiver does not have a crossover point setting, set the Lowpass

Filter on the subwoofer instead within the same recommended settings (see

receiver manual for additional speaker setup info).

“PHASE” 0/180 - This control is used to acoustically match the subwoofer’s

output to your main speakers. Select the position, either 0° or 180°, in which

your subwoofer has more output at the listening position.

“POWER” AUTO/ON/OFF -

When this switch is in the “ON/AUTO/STANDBY”

position, the subwoofer will automatically turn “on” when it senses a signal. It

will automatically go into “standby mode” after 15-20 minutes with no signal.

When this switch is in the “OFF” position, the subwoofer will remain “off” until

the switch is manually turned back to the “ON/AUTO/STANDBY” position.

Power LED indicator - Located on the front baffle, this LED indicates the

operating status of the built-in amplifier. The LED will light green when

the amplifier is on and receiving a signal. If the LED is dark and not lit, the

amplifier is off. For more information on the controls mentioned in this

manual and on bass management, see your dealer or visit www.klipsch.com

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Klipsch RP-1600SW Subwoofer. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Klipsch. Eles podem fornecer um manual original. Você está procurando o manual do seu Klipsch RP-1600SW Subwoofer em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Klipsch Subwoofer
Mais manuais de Subwoofer

Produtos relacionados

Manual

Klipsch SW-112 Subwoofer

Manual

Klipsch R-112SW Subwoofer

Manual

Klipsch C-310ASWi Subwoofer

Manual

Klipsch R-10SW Subwoofer

Manual

Klipsch SW-115 Subwoofer

Manual

Klipsch SW-308 Subwoofer

Manual

Klipsch SW-311 Subwoofer

Manual

Klipsch RP-1200SW Subwoofer

Categorias relacionadas