Manual JBL Arena Sub 100P Subwoofer

Manual

2

SUBWOOFER REAR-PANEL CONTROLS AND CONNECTION

1) Power Mode:

When switched to 'Auto' position, the subwoofer will then be in Standby

mode. It will automatically turn on when an audio signal is detected and

will return to the Standby mode when no audio signal is detected after

approximately 10 minutes. Setting this switch to ‘On’ keeps the

subwoofer powered until Power Switch is turned 'Off.'

2) On/Standby LED:

When the Power Switch is in the ‘On’ position, this LED indicates whether

the subwoofer is in the On or Standby state.

• When the LED glows blue, the subwoofer is turned On.

• When the LED glows red, the subwoofer is in the Standby mode.

3) Phase Switch:

This switch determines whether the subwoofer transducer's piston-like

action moves in and out in phase with the main speakers. If the

subwoofer were to play out of phase with the main speakers, the sound

waves from the main speakers could partially cancel out the sound waves

from the subwoofer, reducing bass performance and sonic impact. This

phenomenon depends in part on the placement of all the speakers relative

to the listening position and to each other in the room.

4) Crossover Control:

This control determines the highest frequency at which the subwoofer

reproduces sounds. The higher you set the Crossover control, the higher

in frequency the subwoofer will operate and the more its bass will

“overlap” that of the speakers. This adjustment helps achieve a smooth

transition of bass frequencies between the subwoofer and the speakers

for a variety of different rooms and subwoofer locations.

5) Volume:

Use this control to adjust the subwoofer’s volume. Turn the knob

clockwise to increase the volume; turn the knob counterclock-wise to

decrease the volume.

6) Subwoofer (LFE Input):

Connect the subwoofer to the dedicated subwoofer / LFE output of a

receiver/processor.

7) Power Switch:

Set this switch in the ‘On’ position to turn the subwoofer on. If you will be

away from home, or will not be using the subwoofer for an extended

period, set this switch in the ‘Off’ position to conserve energy.

8) Power Input:

After you have made and verified the subwoofer’s input connection, plug

the power cord into an active, unswitched electrical outlet for proper

operation of the subwoofer.

DO NOT plug the power cord into the accessory outlets found on some

audio components.

SUB 100P

POWER

MODE

ON

PHASE

NORMAL

AUTO REVERSE

PWR

BLUE: ON

RED: STANDBY

CROSSOVER

50Hz 150Hz

MIN

MAX

VOLUME

SUBWOOFER

INPUT

POWER

ON

OFF

POWER

INPUT

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu JBL Arena Sub 100P Subwoofer. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com JBL. Eles podem fornecer um manual original. Você está procurando o manual do seu JBL Arena Sub 100P Subwoofer em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para JBL Subwoofer
Mais manuais de Subwoofer

Produtos relacionados

Manual

Sony SA-W11S Subwoofer

Manual

Sony SA-W705 Subwoofer

Manual

Klipsch SW-308 Subwoofer

Manual

Polk Audio DSW MicroPRO 4000 Subwoofer

Manual

Polk Audio DSW PRO 600 Subwoofer

Manual

Bowers and Wilkins ASW2000 Subwoofer

Manual

Polk Audio PSW110 Subwoofer

Manual

Polk Audio DSW PRO 500 Subwoofer

Categorias relacionadas