Manual Infiniton 76IXGASG50 Placa

Manual

NOTICE

The stainless steel grease pan and the cast-iron grill, located in the burner and grate packing box, must be

installed, respectively, below and above the electric heating element so that tile element is enclosed between

the two.

The product complies with COMMISSION REGULATION (EU) No 66/2014. In terms of the calculation

formula, please refers to the directive. The testing method is performed based on the directive EN 30-2-1：

1998+A1：2003+A2:2005 (If it is regulated by the government, the relevant testing method would be done

accordingly). Please refer to the product label for the detail concerning the testing figures

In order to reduce the unnecessary waste and control the impact by the combustion, please save the energy

and adjust the gas consumption according to the necessity.

The specialized technician should avoid any damage and deformation of every component when he repair

s the product. The change of relevant components must be done by the authorized technician under the g

uidelines by the manufacturers and distributors. This is a necessary way to avoid the working efficiency im

pacted.

How To Use Your Appliance

The position of the corresponding gas burner or electric hot plate (if present) is indicated on each control

knob.

Gas Burners

The burners differ in size and power. Choose the most appropriate one for the diameter of the cookware

being used.

The burner can be regulated with the corresonding control knob by using one of tile following settings:

OFF

High

Low

To turn on one of the burners, place a lighted match or lighter near the burner, press the knob all the

way in and turn in the counter-clockwise direction to the "High" setting.

On those models fitted with a safety device (F), the knob must be pressed in for about 6

seconds ,until the device that keeps the flame lighted warms up.

On those models fitted with an ignitor (D), the "E" ignition button, identified by the symbol, must

first be pressed and then the corresponding knob pushed all the way in and turned in the counter-clockwise

direction to the "High"setting.

Some models are equipped with an ignition switch incorporated into the control knob. If this is the case, the

ignitor (D) is present, but not the "E" switch (the symbol is located near each knob).

To light a burner, simply press the corresponding knob all the way in and, then, turn it in the counter-clockwise

direction to the High setting, keeping it pressed in until the burner lights.

Caution: If the burner accidently goes out, turn off the gas with the control knob and try to light it again

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Infiniton 76IXGASG50 Placa. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Infiniton. Eles podem fornecer um manual original. Você está procurando o manual do seu Infiniton 76IXGASG50 Placa em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Infiniton Placas
Mais manuais de Placas

Perguntas frequentes sobre Infiniton 76IXGASG50 Placa

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.

Produtos relacionados

Manual

Infiniton GGP-4F Placa

Manual

Infiniton IND-FFT2 Placa

Manual

Infiniton GAS41RO Placa

Manual

Infiniton 77MCIXG Placa

Manual

Infiniton VIT3P54W Placa

Manual

Infiniton GG-419 Placa

Manual

Infiniton GAS419H Placa

Manual

Infiniton GAS-320WB Placa

Categorias relacionadas