Manual Gioteck VX-2 (PS3) Controlador do jogo

Manual

L

R

SELECT

TURBO

START

1

2

1

2

.

simulate the button being pressed

rapidly e.g. “boost firepower”.

The buttons supported by Turbo are

, , , , L1, L2, R1, R2

To enable turbo : Press & hold Turbo

then press the action button you wish

to turbo. The LED will flash when an

action is assigned.

To disable turbo : Repeat the steps

above and the LED will turn o.

More than one button can be

assigned to turbo at one time.

Once powered o, all buttons will

return to default without Turbo.

FEATURES & DETAILS PS3 SET UP & PAIRING

WARNINGS

This symbol indicates

important installation,

operational or maintenance

instructions. Always follow

these instructions closely.

ENVIRONMENT

Please help to conserve the

environment by recycling

the cardboard packaging of

this product.

This product should NOT be

disposed of in normal household

waste. It should be disposed of

separately. Please take it to an

electrical waste collection point.

PRECAUTIONS

This product has been designed

with the highest concern for safety.

However, any electrical device, if used

improperly, has the potential to

cause harm. To help ensure risk-free

operation please pay attention

to the following guidelines.

• Use only as intended. This is a

precision product, handle with care.

• Contains small parts. Not suitable

for children under 3 years of age.

• Store in a dry & dust free area.

• Do not store in areas of extreme

heat or cold, and avoid direct

sunlight or heat sources eg. heaters.

• Do not allow the product to get wet

or dirty; doing so may cause damage.

• Do not clean with benzene, paint

thinner, acetone, alcohol, or other

such solvents.

• Do not take the product apart;

doing so will void your warranty

and may cause electrical shock.

TROUBLESHOOTING TIPS &

TO VIEW THIS MANUAL ONLINE:

www.gioteck.com

Gioteck hereby declares that this product is

in compliance with the essential requirements

and other provisions of Directive 2004/108/

EC and R&TTe 1999/5/EC. To view the full

version of the Declaration of Conformity

please go online to doc.gioteck.com

TouchSense Technology Licensed from

Immersion Corporation. TouchSense

Technology for Spinning Mass Tactile

Feedback Devices protected by one or

more of the following United States

Patents:

5831408, 5844392, 5857986, 5907487,

5959613, 6020875, 6088017, 6104158, 6246390,

6252583, 6271833, 6275213, 6278439, 6343349,

6400352, 6411276, 6424333, 6715045, 6801008,

7131073, 7199790, 7209117, 7299321, 7327348,

7345672, 7502011 and other patents pending.

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there

is no guarantee that interference will not

occur in a particular installation. If this

equipment does cause harmful interference

to radio or television reception, which can

be determined by turning the equipment

o and on, the user is encouraged to

try to correct the interference by one

or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet

on a circuit dierent from that to

which the receiver is connected.

• Consult the dealer or an experienced

radio/TV technician for help.

This equipment complies with FCC

radiation exposure limits set forth

for an uncontrolled environment. End

user must follow the specific operating

instructions for satisfying RF exposure

compliance. This transmitter must not be

co-located or operating in conjunction

with any other antenna or transmitter.

This device complies with Industry Canada

RSS 210 standard(s). Operation is subject

to the following two conditions: (1) this

device may not cause interference, and (2)

this device must accept any interference,

including interference that may cause

undesired operation of the device.

Caution: The user is cautioned that changes

or modifications not expressly approved by

the party responsible for compliance could

void the user’s authority to operate the

equipment. This device complies with Part

15 of the FCC Rules. Operation is subject to

the following two conditions: (1) this device

may not cause harmful interference, and (2)

this device must accept any interference

received, including interference that may

cause undesired operation. Note: This

equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can

LEGALS

This product complies with the

following legal regulations. For further

information go to www.gioteck.com

Complies with

IDA Standards

DB100398

VX-2

LED CHANNEL

1 1

2 2

3 3

4 4

1+4 5

2+4 6

3+4 7

FUNCTION KEYS

To Power On : Press the Home

button once until the LED illuminates.

To Power O : Press & hold the

Home button for 10 secs.

START : To start/pause a game.

HOME : To enter the PS3 menu.

SELECT : To select weapons or tools.

D-PAD: For moving direction

UP/DOWN/LEFT/RIGHT.

Low Battery : The chosen channel

port LED will flash continuously and

motor vibration will stop functioning.

Sleep Mode : The controller will

automatically enter sleep mode

aer 10 minutes of inactivity (all LED

indication will be O). To wake the

controller from sleep mode, press

the Home button.

Operation Time : 35 hours game play.

Turbo Function : Pressing an action

button assigned with turbo will

1. Ensure 2 x AA batteries are loaded

in your controller and that your

PS3 console is turned on.

2. Connect the USB cable between

the controller and the console.

3. Press the Home Button and pairing

will begin automatically. Once paired

the allocated channel port LED(s)

will illuminate. You can now use the

VX-2 in wired mode. To use wirelessly,

unplug the USB cable and the VX-2

will connect to the PS3 wirelessly.

The allocated channel port LED(s)

will then illuminate.

PRESS

& HOLD

KEY MAPPING

To check/change the default

key mapping and functions:

Control Panel > Game Controllers

> Properties > Test

The VX-2 cannot function as

a wireless device with a PC,

it has to maintain connection to

the PC via USB at all times.

PC SET UP

Connect the USB cable between

the controller and the computer.

The driver will install automatically.

# Function USB (PC) Function PS3 Function

1 LED 1 OFF Channel 1 LED

2 LED 2 OFF Channel 2 LED

3 LED 3 OFF Channel 3 LED

4 LED 4 OFF Channel 4 LED

5 HOME N/A PS Button

6

Fire Button 1

Fire Button 2

Fire Button 3

Fire Button 4

1

2

3

4

✕

7

Dpad - UP

Dpad - Right

Dpad - Down

Dpad - Le

POV_UP

POV_RIGHT

POV_DOWN

POV_LEFT

UP

RIGHT

DOWN

LEFT

8

Le Stick-X Axis

Le Stick-Y Axis

L3

Le Stick-X Axis

Le Stick-Y Axis

11

Le Stick- X Axis

Le Stick-Y Axis

L3

9

Right Stick-X Axis

Right Stick-Y Axis

R3

Z Axis

Z Rotation

12

Right Stick-X Axis

Right Stick-Y Axis

R3

10 START 10 START

11 SELECT 9 SELECT

12 R1 6 R1

13 R2 8 R2

14 L1 5 L1

15 L2 7 L2

GB

01 | Select Button

02 | Turbo Button

03 | Start Button

04 | Directional Pad

05 | Function Buttons

06 | Home Button

07 | USB Cable

FR

01 | Touche SELECT

02 | Bouton Turbo

03 | Touche START

04 | Touches directionnelles

05 | Touches de fonction

06 | Touche Home

07 | Câble USB

DE

01 | Select-Taste

02 | Turbo-Taste

03 | Start-Taste

04 | Steuerkreuz

05 | Funktionstasten

06 | Home-Taste

07 | USB-kabel

ES

01 | Botón SELECT

02 | Botón Turbo

03 | Botón START

04 | Botones de dirección

05 | Botones de función

06 | Botón Home

07 | Cable de USB

IT

01 | Tasto SELECT

02 | Tasto TURBO

03 | Tasto START

04 | Tasto direzionale

05 | Tasti funzione

06 | Tasto HOME

07 | Cavo USB

PT

01 | Botão SELECT

02 | Botão Turbo

03 | Botão START

04 | Botões Direccionais

05 | Botões de Função

06 | Botão Home

07 | Cabo de USB

CZ

01 | Tlačítko Vybrat

02 | Turbo tlačítko

03 | Tlačítko Start

04 | Směrová podložka

05 | Funkční tlačítka

06 | Tlačítko Domů

07 | Kabel USB

4. To add multiple controllers (up to 7)

or to assign your controller to a

dierent port go to: Accessory

settings > Reassign controller.

Once connected 1 or 2 LEDs

around the Home button will light.

Motor vibration is not supported in PC mode.

N13179

Thank you for purchasing the

VX-2 Wireless Controller for PC

and Playstation®3 from Gioteck.

We hope that this product will

go beyond your expectations

for a quality made accessory.

Please read this booklet

thoroughly before using

the product and review the

Playstation®3 and PC manual

for additional details regarding

system operation.

Thank you & enjoy!

WIRELESS CONTROLLER

FOR PLAYSTATION®3

|

PC

01

01

02

02

03

03

04 05

04

06

L3

R1L1

R3

R2L2

07

VX-2

WIRELESS

CONTROLLER

PLAYSTATION®3

|

PC

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Gioteck VX-2 (PS3) Controlador do jogo. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Gioteck. Eles podem fornecer um manual original. Você está procurando o manual do seu Gioteck VX-2 (PS3) Controlador do jogo em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Gioteck Controladores do jogos
Mais manuais de Controladores do jogos

Perguntas frequentes sobre Gioteck VX-2 (PS3) Controlador do jogo

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.