Manual FERM PSM1015 Lixadeira vibratória

Manual

54 Ferm

ORBITAL SANDER

THE NUMBERS IN THE FOLLOWING TEXT

CORRESPOND WITH THE PICTURES AT PAGE 2

Caution! For your own safety, carefully read these

instructions for use before using the machine.

The following symbols are used throughout this manual:

Denotes risk of personal injury, loss of life or

damage to the tool in case of non-observance of

the instructions in this manual.

Denotes risk of electric shock.

In accordance with essential applicable safety

standards of European directives

Wear ear and eye protection

Faulty and/or discarded electrical or electronic

apparatus have to be collected at the appropriate

recycling locations.

Carefully read this manual before using the machine.

Make sure that you know how the machine functions and

how to operate it. Maintain the machine in accordance

with the instructions to make sure it functions properly.

Keep this manual and the enclosed documentation with

the machine.

SAFETY INSTRUCTIONS ATTENTION!

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Keep these instructions in a safe place!

1. Keep work area clear.

Cluttered areas and benches invite injuries.

2. Consider work area environment.

Do not expose power tools to rain. Do not use

power tools in damp or wet locations. Keep work

area well lit. Do not use power tools in presence of

flammable liquids or gases.

3. Guard against electric shock.

Prevent body contact with grounded surfaces (e.g.

pipes, radiators, refrigerators).

4. Keep visitors away.

Visitors should be kept away from the work area at

all times. Do not let visitors handle the Electric

Rotary Hammer Drill at any time.

5. Store unused tools.

When not is use keep tools out of reach of children.

Store in a dry and secure location.

6. Do not force tool.

Do not apply undue pressure as this may affect

performance and may cause damage to the machine.

Forcing the job also increases the potential for

accidents.

7. Use right tool.

Do not force small tools or attachments to do the

job of heavy duty tool. Do not use a tool for purposes

not intended.

8. Dress properly.

Do not wear loose clothing or Jewellery. They can be

caught in moving parts. Rubber gloves and nonskid

footwear are recommended when working

outdoors. Wear protective hair covering to contain

long hair.

9. Use safety glasses.

Also use face or dust mask when operation is dusty.

10.Connect dust extraction equipment

If devices are provided for the connection of dust

extraction and collection facilities ensure these are

connected and properly used.

11.Do not abuse cord.

Never carry tool by cord or yank it to disconnect it

from electrical socket. Keep cord from heat, oil and

sharp edges.

12.Secure work.

Use clamps or a vice to hold work. It’s safer than

using your hand and it frees both hands to operate

tool.

13.Do not overreach.

Keep proper footing and balance at all times.

14.Maintain tools with care.

Keep tools sharp and clean for better and safer

performance. Follow instructions for lubricating and

changing accessories. Inspect tool cords periodically

and, if damaged, have repaired by authorized service

facility. Inspect extension cords periodically and

replace if damaged. Keep handles dry, clean and free

from oil and grease.

15.Disconnect tools.

When not in use, before servicing and when changing

accessories such as blades, bits and cutters.

16.Remove adjusting keys and wrenches.

Form the habit of checking to see that keys and

adjusting wrenches are removed from tool before

turning it on.

17.Avoid unintentional starting.

Do not carry plugged-in tools with finger on switch.

Be sure switch is off when plugging in.

18.Outdoor use extension cords.

When tool is used outdoors, use only extension

cords intended for use outdoors and so marked.

Always use tool in conjunction with a residual circuit

breaker device.

19.Stay alert.

Watch what you are doing. Use common sense. Do

not operate tool when you are tired.

20.Check damaged parts.

Before further use of the tool, a guard or other part

that is damaged should be carefully checked to

determine that it will operate properly and perform

its intended function. Check for alignment of moving

parts, binding of moving parts, breakage of parts,

mounting, and any other conditions that may affect

Ferm 3

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu FERM PSM1015 Lixadeira vibratória. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com FERM. Eles podem fornecer um manual original. Você está procurando o manual do seu FERM PSM1015 Lixadeira vibratória em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para FERM Lixadeiras vibratórias
Mais manuais de Lixadeiras vibratórias

Perguntas frequentes sobre FERM PSM1015 Lixadeira vibratória

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.

Produtos relacionados

Manual

FERM PSM1025 Lixadeira vibratória

Manual

FERM DSM1009 Lixadeira vibratória

Manual

FERM PSM1013 Lixadeira vibratória

Manual

FERM PSM1024 Lixadeira vibratória

Manual

FERM PSM1011 Lixadeira vibratória

Manual

FERM PSM1009 Lixadeira vibratória

Manual

FERM PSM1030P Lixadeira vibratória

Manual

FERM PSM1002 Lixadeira vibratória

Categorias relacionadas