Manual FERM LSM1001 Rachador de toras

Manual

Ferm 53

LOG SPLITTER (FLS-37 + FLS-52)

Always read the instruction for electrical products

carefully before use. It will help you understand your

product more easily and avoid unnecessary risks.

Please note that figure references in the text refer to the

figures placed at the front of the manual.

Keep this instruction manual ina safe place for future use.

CONTENTS:

1. Machine data

2. Safety instructions

3. Assembly

4. Use

5. Service & maintenance

1. MACHINE DATA

Technical specification

* The diameter of the log is indicative - a small log can be

difficult to split when it has knobs or a particularly tough

fibre. On the other hand, it may not be difficult to split a

log with regular fibres even if its diameter exceeds the

maximum value indicated above.

Contents of packing

• Log splitter

• Support leg

• Safety instructions

• Instruction manual

• Warranty card

Introduction

With the FLS-37 and FLS-52 you can split wooden logs.

The log splitter works with a hydraulic system driven by

an electromotor. The machine has a two-hand control

to avoid accidents.

Features

Fig.1 + 2

1. Log pusher

2. Work table

3. Wedge

4. Lift handle

5. Support leg

6. Log retaining plates

7. Switch

8. Motor

9. Electric control box

10. Wheels

11. Hydraulic control lever

12. Control lever guard

13. Bleed screw

14. Oil drain bolt / dipstick

15. Maximum pressure limiting screw

16. Circuit protector

2. SAFETY INSTRUCTIONS

EXPLANATION OF SYMBOLS

In this manual and/or on the machine the following

symbols are used:

In accordance with essential applicable safety

standards of European directives

Denotes risk of personal injury, loss of life or

damage to the tool in case of non-observance of

the instructions in this manual

Indicates electrical shock hazard

Read the instructions carefully

Defect and/or discarded electrical tools have to be

brought to the intended institution for separate

collection

Wear eye protection

Weear protective gloves

Model | FLS-37

Art. no. | LSM1001

Voltage | AC 230 V

Frequency | 50 Hz

Input power | 1500 W

IP Class | IP54

Splitting force | 4 t

Log capacity (diameter)* | 5 - 25 cm

Log capacity (length) | 37 cm

Hydraulic oil capacity | 2.2 L

Weight | 43 kg

Model | FLS-52

Art. no. | LSM1002

Voltage | AC 230 V

Frequency | 50 Hz

Input power | 1500 W

IP Class | IP54

Splitting force | 4 t

Log capacity (diameter)* | 5 - 25 cm

Log capacity (length) | 52 cm

Hydraulic oil capacity | 2.8 L

Weight | 48 kg

4 Ferm

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu FERM LSM1001 Rachador de toras. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com FERM. Eles podem fornecer um manual original. Você está procurando o manual do seu FERM LSM1001 Rachador de toras em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para FERM Rachadores de toras
Mais manuais de Rachadores de toras

Perguntas frequentes sobre FERM LSM1001 Rachador de toras

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.

Produtos relacionados

Manual

Fuxtec FX-HS26SK Rachador de toras

Manual

Ryobi RLS4A Rachador de toras

Manual

Far Tools FBH 6T Rachador de toras

Manual

Einhell BT-LS 55 Rachador de toras

Manual

Atika ASP 6 L-2 Rachador de toras

Manual

Bell Logic Rachador de toras

Manual

Far Tools FBH 7T Rachador de toras

Manual

Garland Chopper 252 E Rachador de toras

Categorias relacionadas