Manual Candy CBG640X Exaustor

Manual

ENGLISH

DESCRIPTION

The appliance can be used in both the filtering and ducting version.

In the Filtering version (Fig. 1), the air and vapours conveyed by the appliance are depurated by charcoal filters

and recirculated around the room. ATTENTION: When using the filtering version, charcoal filters must be installed

(the charcoal filters are not supplied). In the Ducting version (Fig. 2), cooking vapours and odours are conveyed

straight outside by a disposal duct which passes through the wall. Use of charcoal filters is therefore unnecessary.

INSTALLATION

Before assembling, in order to manoeuvre the appliance more easily, take off the grease filters: at the handle,

push the stop inwards and pull the filter downwards (Fig. 3).

The following operations are essential for assembly: – Cut a hole in the bottom of the pensile cupboard in

order to settle the appliance (Fig. 4). – Set the power supply near the appliance. – Prepare the air venting hole

if your appliance is to be installed in the ducting version.

To install the appliance, adjust the position of the clasping side springs by means of the proper screws (Fig.5),

according to the thickness of the bored panel to which it is going to be anchored. Insert the appliance in the

pensile cupboard and lock it by means of the side springs. Use the holes which have already been made in the

casing of the appliance to definitively fix it by means of additional 2 screws (Fig. 6).

Ducting version : connect the disposal duct to the air evacuation pipe of the hood. Use a flexible pipe and

lock it to the air evacuation pipe of the hood with a metal hose clamp (pipe and clamp are not provided). Make

the electrical connections.

Filtering version : connect an adequate pipe to the connecting flange of the appliance so that it conveys the air up

to the top of the pensile cupboard (pipe is not provided). Make the electrical connections.

OPERATION

Depending on the model, the unit is equipped with the following controls:

Controls (Fig. 7): A = LIGHT switch. B = MOTOR switch: position 0: motor off; position 1: motor on Ist speed. Position

2: motor on 2nd speed; position 3: motor on 3rd speed. C = Operating motor warning light.

Controls (Fig. 8): A = LIGHT switch. B = MOTOR switch: regulates motor operating speed by means of an electronic

speed variator. C = Operating motor warning light.

Particular care must be paid to the grease filters which must be periodically cleaned in relation to use (at

least once every two months). Remove the grease filters and wash them either by hand or in the dishwasher using

neutral detergent. To take off the grease filters: at the handle, push the stop inwards and pull the filter downwards

(Fig. 3).

When using the filtering version of the appliance, the charcoal filters must be changed according to use

(Fig. 9), usually every six months. Remove the filters rotating them and replace them rotating into the opposite

direction.

Lights:

- To replace the bulbs remove the grease filters as previously described (Fig.3) so as to be able to access the

inside of the appliance. Remove the fixture: apply a slight pressure on the 2 stops and at the same time push

the fixture downwards (Fig. 10). Unscrew the bulb and replace only with CANDLE HALOGEN LAMP - Ø 35mm,

E14–220-240 Vac, 28W or INCANDESCENT LAMP, E14–220-240 Vac, 40W

- If the halogen lamps need changing, slacken the ring nut in an anticlockwise direction and remove the bulb

itself (Fig. 11). Replace with a bulb of the same type. CAUTION: Do not handle glass bulb with bare hands.

In case the new halogen bulb does not light up once it is on, disconnect the apparatus for a few seconds.

DEUTSCH

GERÄTEAUSFÜHRUNG

Das Gerät kann sowohl im Umluftbetrieb, als auch im Abluftbetrieb eingesetzt werden.

Im Umluftbetrieb (Abb. 1) wird die Luft zusätzlich durch den (einmotoriges Gerät) / die (zweimotoriges Gerät)

Aktivkohlefilter geleitet und in den Raum zurückgeführt. Pro Motor ist somit ein Kohlefilter erforderlich (Die Kohlefilter

werden nicht mitgeliefert). Im Abluftbetrieb (Abb. 2) wird der Kochdunst durch Abluftrohre ins Freie geleitet.

Kohlefilter sind im Abluftbetrieb nicht erforderlich.

MONTAGE DES GERÄTS

Vor dem Montieren und zur leichteren Handhabung des Gerätes die Fettfilter entfernen: in Übereinstimmung

mit dem Handgriff den Feststeller nach innen stossen und den Filter nach unten ziehen (Abb. 3).

Wesentliche Vorbedingungen zum Montieren: – Am Boden des Hängeschrankes die zum Unterbringen des

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Candy CBG640X Exaustor. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Candy. Eles podem fornecer um manual original. Você está procurando o manual do seu Candy CBG640X Exaustor em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Candy Exaustores
Mais manuais de Exaustores

Perguntas frequentes sobre Candy CBG640X Exaustor

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.

Produtos relacionados

Manual

Candy CBT625/2B/1 Exaustor

Manual

Candy CVMI 900 X Exaustor

Manual

Candy CCR616X Exaustor

Manual

Candy CCR61BA Exaustor

Manual

Candy CCG6MX/A Exaustor

Manual

Candy CCE119/1N Exaustor

Manual

Candy CDG6CEB Exaustor

Manual

Candy CCE 19/2X Exaustor

Categorias relacionadas