Manual Bionaire BFH430 Aquecedor

Manual

3. The digital thermostat will memorise the

settings if the heater is turned off using the

"MODE" button (see 6 above). However, if the

heater is unplugged, the digital thermostat

settings will need to be reprogrammed as

detailed from above.

USING THE TIMER

Programmable Timer (For BFH430 only)

The user can programme the heater to come

ON at a preset time OR switch OFF after a

selected period.

Setting the ON timer

1. If the heater is on, press the mode button for

2 seconds to switch the heater off.

2. While the heater is off, hold down both the (+)

and (-) buttons together to select timer. The

display will flash and a red dot will flash on

the right hand side of the digital display.

3. Using either the (+) or (-) buttons, programme

the heater to switch on up to 16 hours later, in

increments of 1 hour.

4. After the preset length of time the heater will

automatically turn on.

Setting the OFF timer

1. Select the Mode and temperature you want

the heater to run in (e.g. Lo-Auto-18˚) as above.

2. While the heater is running hold down both

the (+) and (-) buttons together to select timer.

The display will flash and red dot will flash on

the right hand sode of the digital display.

3. Using either the (+) or (-) buttons programme

the heater to turn off up to 16 hours later in

increments of 1 hour.

4. After setting the time, the digital display will

return to showing the current room

temperature and will illuminate to show the

timer is activated. After the predetermined

length of time has passed, the heater will

automatically switch off.

NOTE:

1. When the timer is set, a red dot will flash

continuously in the right hand side of the

digital display.

2. If the Mode button is pressed when the timer

is actived, the timer function will be

cancelled. To reactivate the timer, it will need

to be reprogrammed as detailed above.

3. It is not possible to set the on and off timers

as part of the same programme.

MOUNTING THE HEATER ON THE

WALL - (Fig. 3 - 4)

1. Use the bracket as a template to mark the

position of the holes to be drilled.

(NOTE: Ensure that the position you choose

is suitable for mounting the heater and that

the area for fixing is away from hidden

electrical cables or pipes.)

2. Drill the holes and fix the bracket to the wall

using wall plugs and screws.

3. Slide the heater correctly onto the bracket

until it "clicks" firmly into place and the heater

is safely held.

FROST GUARD

For BFH420 only

Turn the thermostat to the minimum (furthest

left position). The unit will automatically start

when the temperature drops below 5˚C.

For BFH430 only

Press the 'Mode' button 5 consecutive times

for Anti Frost setting (AF will show in the

digital display). This special setting is

automatically activated when the (AF) mode is

selected. In this mode, the heater is off until

the room's temperature reaches freezing and

the heater automatically turns on HI power.

The heater will cycle ON and OFF as it

maintains the temperature between 5˚C - 8˚C.

AUTO SAFETY SHUT OFF

This heater is equipped with a technologically

advanced safety system that requires the user to

reset the heater if there is a potential overheat

situation. When a potential overheat situation is

reached, (e.g. if the heater was accidentally covered)

the system will automatically switch the heater off.

Operation can only be resumed if the user resets the

heater as detailed below.

To reset the heater

1. Unplug the heater and allow 30 minutes for

the heater to cool down.

2. After 30 minutes plug the heater in and

operate normally.

CLEANING

• Turn the unit to (OFF) position.

• Remove the plug from the wall socket.

• Wait for the heater to cool down sufficiently.

• You may clean the outside of the heater with a

Example - Switch OFF

The time is 1 pm. The heater is running and

you require the heater to switch off at 5 pm

therefore: Set the time at 4 hours.

Example - 4 hours.

Example - Switch ON

The time is 1 pm. You require the heater to

switch on at 5 pm therefore: Set the ON time

at 4 hours.

Example - 4 hours.

• Keep the mains cord at a safe distance from

the main body of the heater.

• Prevent overheating of the heater by keeping

the air inlet and outlet unblocked. DO NOT

hang anything in front of or above the heater.

• If overheating should occur, the built-in

overheating safety device will switch off the

heater.

• DO NOT use aerosols, inflammable

substances or materials sensitive to heat in

the flow of hot air.

Servicing

• Should the heater stop working, first check

the fuse in the plug (UK only) or fuse/circuit

breaker at the distribution board is operating,

before contacting the manufacturer or

service agent.

• If the supply cord or plug is damaged, it must

be replaced by the manufacturer or its

service agent or a similarly qualified person

in order to avoid hazard.

• The heater contains no user serviceable

parts and should the product suffer damage

or breakdown it must be returned to the

manufacturer or their service agent.

HOW TO REMOVE THE HEATER FROM

THE BRACKET

1. Always unplug the heater first.

2. Push the small lug on the bracket

downwards and simultaneously pull the

appliance off the bracket.

OPERATION (FOR BFH420 ONLY)

Setting the power level

Turn the Mode control (B) switch clockwise

= fan position - cool air

1 = low power (1200 watts)

2 = high power (2400 watts)

Setting the temperature level

Use the thermostat to set the desired

temperature level. The thermostat will maintain

the desired temperature level by switching on

and off at intervals.

1. To find the ideal thermostat setting, turn the

thermostat knob (C) clockwise as far as it will

go.

2. When the desired temperature is reached,

slowly turn the thermostat knob anti-clockwise

until the heater turns off.

3. The heater will now automatically retain the

temperature at the required level.

USING THE TIMER (FOR BFH420 ONLY)

Your heater has been equipped with a timer.

When the timer is used, the heater will switch

itself off after a preset time (max. 180 minutes).

Turn the timer control (A) clockwise and set the

number of minutes e.g. 30 = On for 30 minutes.

The pilot light goes on and the appliance

switches on at the preset temperature and

setting. The heater switches off and the pilot

light goes out as soon as the preset time has

elapsed. e.g. if you turn the dial clockwise to 30,

the heater will stay on for 30 minutes and then

switch off.

To switch the timer off:

Slowly turn the timer control anti-clockwise and

select setting.

DIGITAL TEMPERATURE CONTROL

(FOR BFH430 ONLY)

This heater is equipped with a digital thermostat

that allows you to set the precise temperature

that you require. Altematively, use the manual

option to set the heater to run continuously.

1. Press the 'MODE" button (A) once for manual

LOW power. "Lo" (1200W) will show in the

digital display.

2. Press the " MODE" button again for manual

HIGH power. "Hi" (2400W) will show in the

digital display.

3. Press the "MODE" button again for

AUTO/HIGH power. The preset thermostat

temperature will flash for 2 seconds in the

digital display.

4. Press the "MODE" button again for

AUTO/LOW power. The preset thermostat

temperature will flash for 2 seconds in the

digital display (B).

5. To raise or decrease the preset themostat

setting (13ºC-30ºC). scroll up or down using

the (+) or (-) buttons. The digital display will

flash the selected preset temperature for 2

seconds. If the room temperature is below

your selected thermostat temperature the

heater will switch on and the room

temperature will gradually increase until the

preset temperature is reached. The digital

thermostat will now automatically maintain the

heater temperature at the desired level.

6. To shut the unit off at any time, press the

"MODE" button for 2 seconds.

NOTE:

1. If the heater will not switch on in the Auto

mode, please check the room temperature is

not higher than the preset thermostat

temperature.

2. It is normal for the heater to cycle On and Off

as it maintains the selected room temperature. In

Auto mode, when the heater automatically

switches off, the High or Low indicator (depending

on the setting) will flash. To run the heater

continuously select manual High or Low.

3

4

BFH4420-430 I_IB.qxd:BFH400/410I07MLM1.qxd 3/4/10 10:31 AM Page 3

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Bionaire BFH430 Aquecedor. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Bionaire. Eles podem fornecer um manual original. Você está procurando o manual do seu Bionaire BFH430 Aquecedor em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Bionaire Aquecedores
Mais manuais de Aquecedores

Perguntas frequentes sobre Bionaire BFH430 Aquecedor

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.

Produtos relacionados

Manual

Bionaire BOH2001 Aquecedor

Manual

Bionaire BFH420 Aquecedor

Manual

Bionaire BFH910 Aquecedor

Manual

Bionaire BOH2503D Aquecedor

Manual

Bionaire BCH160 Aquecedor

Manual

Bionaire BOH2503 Aquecedor

Manual

Bionaire BOH2003 Aquecedor

Manual

Bionaire BCH920 Aquecedor

Categorias relacionadas