Manual Bionaire BCH920 Aquecedor

Manual

2 3

Fig.2

Fig.1

F

C

F

G

G

BFH910, BCH920

A

E

D

BFH910, BCH920

B

RETAIN THE FOLLOWING FOR FUTURE

REFERENCE.

DESCRIPTIONS (See Fig.1 & 2)

A. Main Housing

B. Control Panel

C. Front Grill

D. Carry Handle

E. Power Light

F Mode control

G Thermostat control

PLEASE READ AND SAVE THESE

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic safety

precautions should always be taken including the

following:

1. Before connecting the heater, check that

the voltage indicated on the rating plate

corresponds to the main voltage in your

home/offi ce.

2. WARNING: In order to avoid overheating,

do not cover the heater (

).

3. DO NOT position the heater directly under a

power socket.

4. Do not use this heater in the immediate

surroundings of a bath, a shower or a

swimming pool.

5. If the supply cord or plug is damaged, it must

be replaced by the manufacturer or its service

agent or similarly qualifi ed person in order to

avoid hazard. The heater contains no user

serviceable parts. Should the product suffer

damage or breakdown, it must be returned to

the manufacturer or their service agent.

6. Under the environment with electrical fast

transient, the product may malfunction and

require user to reset the product.

7. Do not use this heater with a programmer,

timer or any other device that switches the

heater on automatically, since a fi re risk

exists if the heater is covered or positioned

incorrectly.

8. Only touch the heater with dry hands.

9. DO NOT use this heater outdoors.

10. DO NOT position where it can be touched by

children, especially the very young.

11. Allow a safe area around the heater away

from furniture or other objects; at least 50

cm from the top and sides and 200 cm at the

front.

12. Do not use this heater when it is lying on its

side.

13. DO NOT use the heater in rooms with

explosive gas (e.g. petrol) or while using

infl ammable glue or solvent (e.g. when gluing

or varnishing parquet fl oors, PVC etc).

14. DO NOT insert any objects into the heater.

15. Keep the mains cord at a safe distance from

the main body of the heater.

16. If overheating should occur, the built-in

overheating safety device will switch off the

heater.

17. Do not place the cord under a rug.

18. The heater cannot be used adjacent to

curtains or combustible material. Curtains or

combustible material may be burned if the

heater was installed incorrectly.

19. This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities,

or lack of experience and knowledge,

unless they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

Children should be supervised to ensure that

they do not play with the appliance.

20. WARNING: Risk of Fire. Discontinue

use if the outlet or plug become hot to the

touch. Overheating may indicate a worn

or damaged outlet. Consult a qualifi ed

electrician for outlet replacement.

21. CAUTION: In order to avoid a hazard due

to inadvertent resetting of the thermal cutout,

this appliance must not be supplied through

an external switching device, such as a timer,

or connected to a circuit that is regularly

switched on and off by the utility.

OPERATING INSTRUCTIONS

1. Make sure the unit is in the OFF (O) position

before plugging the heater into the wall

socket/outlet.

2. Place heater on a fi rm level surface. Once

plugged in, the power light (E) will illuminate.

Mode Control

Turn the Mode Control (F) to the desired setting:

O - Off Mode

If you want to shut off the heater at any time

of operation, turn the mode button to OFF (O)

position. The power light will remain lit until the

heater is unplugged.

- Fan only Setting

heater will run at Fan-only operation without any

heat output.

1- LOW Heat

The heater will run continuously at 1100W

(BFH910) and 1000W (BCH920).

ENGLISH

2- HIGH Heat

The heater will run continuously at 2200W

(BFH910) and 2000W (BCH920).

NOTE: To start the heater operation, make sure

the Thermostat Control (G) is turned to the full

clockwise position.

- Thermostat Control

1. Before setting the thermostat, allow heater

to operate and warm up the room. As noted

above, you need to turn the Thermostat

Control (G) to the full clockwise position to

start the heater.

2. When the desired temperature/ comfort level

is reached, lower the thermostat setting until

the heater stops operating. This is done by

moving the the Thermostat control(G) anti-

clockwise toward the Frost Guard setting

(

). The thermostat is set to 5°C at the

Frost Guard setting ( ), the heater will turn

on automatically if the temperature goes

below 5°C so as to avoid a frost situation.

3. The control will now automatically maintain

the pre-set temperature level by turning the

heater ON and OFF.

NOTE: It is normal for the heater to cycle ON

and OFF as it it maintains the preset

temperature. To prevent the unit from cycling ,

you need to change the thermostat setting.

CAUTION: FRONT GRILL (C) IS HOT WHEN

UNIT IS IN OPERATION.

AUTO SAFETY SHUT OFF

This heater is equipped with a technologically-

advanced safety system that requires the user to

reset the heater if there is a potential overheat

situation. When a potential overheat temperature

is reached, the system will automatically shut the

heater off. It can only resume operation when the

user rests the unit. If the heater shuts off, please

follow the specific reset instructions below:

1. Turn Mode Control to OFF (O) position and

the Thermostat Control fully anti-clockwise to

the Frost Guard setting.

2. Unplug unit from socket and wait 30 minutes.

3. Plug in and turn ON.

CLEANING AND MAINTENANCE

• Turn off the unit.

• Remove the plug from the wall socket.

• Wait for the heater to cool down suffi ciently.

• You may clean the outside of the heater with

a damp cloth. DO NOT allow water to come

into the appliance. DO NOT use soap or

chemicals, which may damage the housing.

Allow suffi cient time to dry before plugging

the unit back in the socket.

• Clean the air inlet and outlet openings

regularly (with normal use at least twice a

year) with a vacuum cleaner.

Troubleshooting for your Heater

Trouble Probable Cause Solution

• Heater

Does Not

Turn On.

☛

Manual user reset is activated.

☛

Not plugged in properly.

☛

Electrical outlet does not hold

plug in securely.

☛

Thermostat set too low.

☛

Obstruction causing the heater

not to work.

✔

Follow reset instructions listed in this

manual.

✔

Ensure plug is properly inserted.

Make sure electrical outlet and circuit

breaker are working.

✔

Have outlet replaced by a licensed

electrician.

✔

Turn Thermostat Control clockwise

until the heater restarts.

✔ Unplug the heater and remove all

obstructions. Position your heater

at least 50cm away from obejcts for

the top, back and sides and at least

200cm distance away from objects for

the front grill.

• Not Enough

Heat.

☛

Heater is in Low Heat or 1

setting.

☛

Thermostat set too low.

✔

Change setting to 2 (High Heat).

✔

Turn Thermostat Control clockwise

until the heater restarts.

BFH910/BCH920-I_09MLM2.indd 4-6BFH910/BCH920-I_09MLM2.indd 4-6 6/30/09 9:34:27 AM6/30/09 9:34:27 AM

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Bionaire BCH920 Aquecedor. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Bionaire. Eles podem fornecer um manual original. Você está procurando o manual do seu Bionaire BCH920 Aquecedor em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Bionaire Aquecedores
Mais manuais de Aquecedores

Perguntas frequentes sobre Bionaire BCH920 Aquecedor

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.

Produtos relacionados

Manual

Bionaire BCH9210 Aquecedor

Manual

Bionaire BOF1500 Aquecedor

Manual

Bionaire BOH2001 Aquecedor

Manual

Bionaire BFH6616 Aquecedor

Manual

Bionaire BOH1501W Aquecedor

Manual

Bionaire BFH430 Aquecedor

Manual

Bionaire BOH2503 Aquecedor

Manual

Bionaire BOH1501 Aquecedor

Categorias relacionadas