Manual Bauknecht GT 193 Congelador

Manual

INSTRUCTIONS FOR USE

GB

1. Lid handle

2. Lock (if provided)

3. Seal

4. Defrost water drain plug (if present)

5. Control panel

6. Basket (if present)

7. Condenser (located at the rear)

INSTALLATION

• Please refer to the chapter "BEFORE USING THE

APPLIANCE".

• Unpack the appliance.

• Remove the 4 protection pieces inserted between

lid and appliance.

• Ensure that the defrosting water drainage plug (if

provided) is correctly positioned (4).

• For best operation of the appliance and in order to

avoid damage when the lid is opened, leave a space of

at least 7 cm from the rear wall and 7 cm at the sides.

• Fit the accessories (if provided).

1. Thermostat: it can be used to adjust the internal

temperature of the appliance.

2. Red LED (if provided): Indicates that the appliance

temperature is not sufficiently low.

3. Green LED (if provided): indicates that the appliance is on.

4. Yellow/orange illuminated button (if provided):

activates/deactivates the fast freeze function.

The exact configuration of the controls may vary

according to the model.

Switching on the appliance

• The appliance is factory set for optimum operation at a

temperature of -18°C.

• Plug in the appliance.

• The green LED lights up (if provided).

• Also the red LED (if provided) will switch on because the

temperature inside the appliance is not yet sufficiently low

for food storage. The red LED will normally switch off

within the first six hours after the appliance is switched on.

• After connecting the appliance to the mains supply and when

the optimal temperature has been reached (this phase takes

about 1 hour during which the lid will not open), ensure that

the fast freeze button is not pressed (the yellow LED, if

provided, is off).

• Place food inside the product only when the red LED (if

provided) has switched off.

• Thanks to the efficient lid seal, the appliance lid will not re-

open easily immediately after closing. Wait a few minutes

before re-opening the lid of the appliance.

Temperature Adjustment

Use the thermostat to select the ideal storage temperature. To

adjust the internal temperature, proceed as follows:

• Turn the thermostat knob to 1 for a storage temperature

that is less cold.

• Turn the thermostat knob to 6 for a colder storage

temperature.

• For partial loads, or when the load indicator is below the "e"

symbol inside the appliance (if present), it is advisable to

move the thermostat to the lower position (on "e", if present

on the thermostat scale).

Climatic Class Amb. T. (°C) Amb. T. (°F)

SN From 10 to 32 From 50 to 90

N From 16 to 32 From 61 to 90

ST From 16 to 38 From 61 to 100

T From 16 to 43 From 61 to 110

CO Small

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Bauknecht GT 193 Congelador. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Bauknecht. Eles podem fornecer um manual original. Você está procurando o manual do seu Bauknecht GT 193 Congelador em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Bauknecht Congeladores
Mais manuais de Congeladores

Perguntas frequentes sobre Bauknecht GT 193 Congelador

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.