Manual AEG X91384MI03 Exaustor

Precisa de um manual para o seu AEG X91384MI03 Exaustor? Abaixo você pode visualizar e baixar gratuitamente o manual em PDF em português. Este produto tem atualmente 3 perguntas frequentes, 0 comentários e tem 0 votos. Se este não for o manual que você deseja, por favor contacte-nos.

Seu produto está com defeito e o manual não oferece solução? Vá a um Repair Café para obter serviços de reparo gratuitos.

Manual

Loading…

3
english
1. RECOMMENDATIONS AND
SUGGESTIONS
The Instructions for Use apply to several ver-
sions of this appliance. Accordingly, you may
nd descriptions of individual features that do
not apply to your specic appliance.
The manufacturer will not be held liable for any
damages resulting from incorrect or improper
installation.
The minimum safety distance between the
cooker top and the extractor hood is 650 mm
(some models can be installed at a lower
height, please refer to the paragraphs on work-
ing dimensions and installation).
Check that the mains voltage corresponds to
that indicated on the rating plate xed to the
inside of the hood.
For Class I appliances, check that the domestic
power supply guarantees adequate earthing.
Connect the extractor to the exhaust ue
through a pipe of minimum diameter 120
mm. The route of the ue must be as short as
possible.
Do not connect the extractor hood to exhaust
ducts carrying combustion fumes (boilers,
replaces, etc.).
If the extractor is used in conjunction with
non-electrical appliances (e.g. gas burning ap-
pliances), a sufcient degree of aeration must
be guaranteed in the room in order to prevent
the backow of exhaust gas. The kitchen must
have an opening communicating directly with
the open air in order to guarantee the entry of
clean air. When the cooker hood is used in con-
junction with appliances supplied with energy
other than electric, the negative pressure in the
room must not exceed 0,04 mbar to prevent
fumes being drawn back into the room by the
cooker hood.
In the event of damage to the power cable, it
must be replaced by the manufacturer or by
the technical service department, in order to
prevent any risks.
Connect the hood to the mains through a
two-pole switch having a contact gap of at least
3 mm.
If the instructions for installation for the gas hob
specify a greater distance specied above, this
has to be taken into account. Regulations con-
cerning the discharge of air have to be fullled.
2. USE
The extractor hood has been designed ex-
clusively for domestic use to eliminate kitchen
smells.
Never use the hood for purposes other than for
which it has been designed.
Never leave high naked ames under the hood
when it is in operation.
Adjust the ame intensity to direct it onto the
bottom of the pan only, making sure that it does
not engulf the sides.
Deep fat fryers must be continuously monitored
during use: overheated oil can burst into
ames.
Do not ambè under the range hood; risk of
re.
This appliance is not intended for use by per-
sons (including children) with reduced physical,
sensory or mental capabilities, or lack of experi-
ence and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that
they do not play with the appliance.
“ CAUTION: Accessible parts may become hot
when used with cooking ap-pliances”.
3. MAINTENANCE
Switch off or unplug the appliance from the
mains supply before carrying out any mainte-
nance work.
Clean and/or replace the Filters after the speci-
ed time period (Fire hazard).
- Activated charcoal lter W These lters are
not washable and cannot be regenerated,
and must be replaced approximately every 4
months of operation, or more frequently with
heavy usage.
- Grease lters Z The lters must be cleaned
every 2 months of operation, or more fre-
quently for particularly heavy usage, and can
be washed in a dishwasher.
- Control lights, if present.
Clean the hood using a damp cloth and a
neutral liquid detergent.
W
Z
Descarregue o manual em português (PDF, 15.27 MB)
(Considere o meio ambiente e apenas imprima este manual se for realmente necessário)

Loading…

Avaliação

Deixe-nos saber o que você pensa sobre a AEG X91384MI03 Exaustor, deixando uma classificação do produto. Quer compartilhar suas experiências com este produto ou fazer uma pergunta? Por favor, deixe um comentário na parte inferior da página.
Você está satisfeito com AEG X91384MI03 Exaustor?
Sim Não
Seja o primeiro a avaliar este produto
0 votos

Participe da conversa sobre este produto

Aqui você pode compartilhar o que pensa sobre AEG X91384MI03 Exaustor. Se você tiver alguma dúvida, primeiro leia atentamente o manual. A solicitação de manual pode ser feita através do nosso formulário de contato.

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu AEG X91384MI03 Exaustor. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com AEG. Eles podem fornecer um manual original. Você está procurando o manual do seu AEG X91384MI03 Exaustor em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Marca AEG
Modelo X91384MI03
Categoria Exaustores
Tipo de arquivo PDF
Tamanho do arquivo 15.27 MB

Todos os manuais para AEG Exaustores
Mais manuais de Exaustores

Perguntas frequentes sobre AEG X91384MI03 Exaustor

Nossa equipe de suporte pesquisa informações úteis e respostas a perguntas frequentes sobre produtos. Se você encontrar algum dado incorreto em nossas perguntas frequentes, informe-nos usando nosso formulário de contato.

Qual a distância que deve haver entre o meu exaustor e o meu fogão de mesa? Verificado

Isto pode variar dependendo da marca, mas geralmente um exaustor deve ser posicionado pelo menos 65 centímetros acima de um fogão de mesa a gás e pelo menos 50 centímetros acima de um fogão de mesa elétrico ou de indução. Isto é para melhorar a segurança contra incêndios

Isso foi útil (1215) Consulte Mais informação

Preciso de um exaustor com ou sem motor? Verificado

Os exaustores com motor destinam-se a quando o ar é movido diretamente para o exterior. Um exaustor sem motor é adequado para quando existe um sistema de ventilação central. Nunca conecte um exaustor com motor a um sistema de ventilação central!

Isso foi útil (636) Consulte Mais informação

Como posso limpar os filtros do exaustor AEG? Verificado

Os filtros de todos os exaustores AEG podem ser lavados à mão. Alguns modelos possuem um filtro que pode ser lavado na máquina de lavar louça. Isso pode ser encontrado no manual do usuário. Certifique-se de que o filtro esteja seco ao colocá-lo de volta na coifa.

Isso foi útil (208) Consulte Mais informação
Manual AEG X91384MI03 Exaustor

Produtos relacionados

Categorias relacionadas