Manual Adler AD 7939 Repelente de pragas

Manual

4

2. Not suitable use in garages, stables and alike where the dust density in the air can be high.

3. Do not use the device in the inflammable or explosive locales and alike.

Assembling

1. Install the device at a height of at least 2 meters on the wall so that children cannot reach it.

2. Mark the holes in the plastic hanger (10) on the wall with a pencil. Drill holes in the wall, install the supplied wall plugs (11). Screw the

wall plastic hanger (10) with the included screws (12).

3. Hang the device by matching the hanging plate (7) with the wall plastic hanger (10).

4. It is best to choose location close to the doors or windows but without direct wind power flows, or other place you had observed the

insects are flying often before. Location is important for efficiency.

Device Description: Mosquito killing device AD7939 – look at page 2

1.Housig 2.Front net 3. Two UV fluorescent lamps

4.High voltage metal grid 5. Died insects collection tray 6. Power cord

7. Hanging plate 8. Lamp casing 9. Rope ON/OFF switch

10. Wall plastic hanger 11. Wall plugs 12. Screws

PRINCIPLE OF OPERATION

The device attracts insects with UV light with a UV wavelength of 365nm, insects fly inside the device, then touch the high voltage metal

grid (4) causing insects to die. Plug device into an electric socket before switch on the light or switch off all the strong lights for 10-20

minutes suddenly. Use the device away from the places with wind power, strong UV ray and other fluorescent lamps irradiation and also

far away from the children could reach. Do not put your hands into the device or carry it while it is running.

USE

1. Make sure that your local voltage and frequency is suitable for the device. Ensure the earth-connection works properly to prevent

damage or danger.

2. Insert the plug into the socket. Turn on the device by pulling the rope switch (9), the UV light lamps (3) will illuminate on and the device

works.

3. Pull the rope switch (9) again, the UV light lamps will switch off.

4. Unplug the socket.

PROCEDURE TO CHANGE THE LAMP

1.Turn off and unplug the device from socket. Take out it from the plastic hanger (10).

2.Unscrew the lamp casing (8) in the rear of the device with a screw driver. Take out the lamp casing (8) and rotate the UV lamp (3) to

take it out from the lamp holder.

3. Insert the new lamp and rotate it to fix it on place. Screw the lamp casing (8) again.

4. Place the device on the wall plastic hanger (10) and switch on it to continue operation.

CLEANING AND MAINTENANCE

1. Before cleaning or maintenance, unplug the device and allow it to cool down.

2. Do not use aggressive chemical cleaning agents for cleaning. Wipe the housing with a damp cloth and mild detergent.

3. Every week clean the tray (5) from died insects bodies by slide out the tray. Empty the collecting tray and slide in again.

4. Clean the dead insects from front net (2) and the high voltage metal grid (4) by soft brush, when the device is unplugged and leave for

10 minutes. The dead insects won't affect the function, but it's better to clean the grid while a lot of insect on it.

5. Make sure the device is dry before switching it on again.

TECHNICAL DATA

Light source lifetime minimum 5.000 hours,

Light source type: UV fluorescent lamp wavelength of 365nm,

Lamp type: T5, Power: 4W, Size: Ø16mm, length 135.9mm

Power supply of the device: 220-240V ~50/60Hz

Power of the device: 2x4W

To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste

bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may

effect the environment. Do not dispose this appliance in the common waste bin.

DEUTSCH

ALLGEMEINE SICHERHEITSVORSCHRIFTEN LESEN SIE AUFMERKSAM WICHTIGE

ANWEISUNGEN BEZÜGLICH DER SICHERHEIT DER BENUTZUNG BEWAHREN SIE

DIESE FÜR DIE ZUKUNFT AUF

Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen

geändert.

1.Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen

Hinweise beachten. Der Produzent trägt keine Verantwortung für Schäden, die aufgrund

von bestimmungswidriger Nutzung oder unsachgemäßer Bedienung entstanden sind.

2.Das Gerät ist nur für den Hausgebrauch verwendet. Verwenden Sie es nicht für andere

Zwecke als den bestimmungsgemäßen Gebrauch.

3.Das Gerät ausschließlich an die Steckdose 220-240 V - 50/60Hz anschließen. Es darf

nicht zu anderen, bestimmungswidrigen Zwecken benutzt werden. Wegen

Vorsichtsmaßnahmen, sollten keine weiteren Geräte an den gleichen Stromkreis

angeschlossen werden.

Avaliação

Mais sobre este manual

Entendemos que é bom ter um manual em papel para o seu Adler AD 7939 Repelente de pragas. Você sempre pode baixar o manual em nosso site e imprimi-lo você mesmo. Se desejar um manual original, recomendamos que entre em contato com Adler. Eles podem fornecer um manual original. Você está procurando o manual do seu Adler AD 7939 Repelente de pragas em outro idioma? Escolha o seu idioma preferido em nossa página inicial e pesquise o número do modelo para ver se o temos disponível.

Especificações

Todos os manuais para Adler Repelentes de pragas
Mais manuais de Repelentes de pragas

Produtos relacionados

Manual

Adler AD 7934 Repelente de pragas

Manual

Adler AD 7938 Repelente de pragas

Manual

Kooper 2192708 Repelente de pragas

Manual

Eurom Fly Away 30 Repelente de pragas

Manual

Orbegozo MQ 5030 Repelente de pragas

Manual

Camry CR 7937 Repelente de pragas

Manual

Nedis INKI110CBK16 Repelente de pragas

Manual

Camry CR 7936 Repelente de pragas

Categorias relacionadas